D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-605L => Topic started by: ndbsdg on June 02, 2016, 05:18:53 AM

Title: Not connected
Post by: ndbsdg on June 02, 2016, 05:18:53 AM
I have tried looking through the FAQ and do not find my problem.  I have a DIR 605L router that does NOT have a reset button.  I had it hooked up and working fine.  I went into the settings to add security and passwords.  I told it to save my changes.  Once it rebooted, it tells me that the internet is NOT CONNECTED.  In an attempt to rectify on my own, I did go in and use the reset feature thinking that might fix it.  When the modem is hooked to the computer I have a good internet connection.  I have tried multiple cables.  I have tried all four sockets on the back of the unit.  I am hoping someone can get me functioning again.
Title: Re: Not connected
Post by: FurryNutz on June 02, 2016, 11:20:47 AM
Router:
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)


Internet Service Provider and Modem Configurations

I recommend that you have your ISP check the cabling going to the ISP modem, check signal levels going to the ISP modem. For DSL or Fiber service lines, ensure that the ISP is using good working phone or cable lines to the DSL modem and that the phone lines are filtered correctly. For cable Internet, RG-6 coaxial cable is needed, not RG-59. Check for t.v. line splitters and remove them as they can introduce noise on the line and lower the signal going to the ISP modem. I recommend having the ISP service physically check the lines going from the out side to the ISP modem. Connecting to the ISP modem could result in a false positive as the signal to the modem could be just enough to that point then adding on a router, could see problems. The router operation is dependent upon getting good data flow from the ISP modem and the modem is dependent upon getting good signal from the ISP Service.
Title: Re: Not connected
Post by: FurryNutz on July 25, 2016, 07:01:22 AM
Any status on this?  ???

I have tried looking through the FAQ and do not find my problem.  I have a DIR 605L router that does NOT have a reset button.  I had it hooked up and working fine.  I went into the settings to add security and passwords.  I told it to save my changes.  Once it rebooted, it tells me that the internet is NOT CONNECTED.  In an attempt to rectify on my own, I did go in and use the reset feature thinking that might fix it.  When the modem is hooked to the computer I have a good internet connection.  I have tried multiple cables.  I have tried all four sockets on the back of the unit.  I am hoping someone can get me functioning again.