D-Link Forums

D-Link FAQ => Router FAQs => FAQs => Topic started by: FurryNutz on December 04, 2013, 10:03:17 AM

Title: New - Xbox One/360 Console Setup/Troubleshooting Information
Post by: FurryNutz on December 04, 2013, 10:03:17 AM
Please review this information for all Xbox One game consoles as new ports may need to be added as well however shouldn't if the router is set up well:
How To: Open NAT to resolve multiplayer and party problems (updated with Xbox One info) (http://forums.xbox.com/xbox_forums/xbox_support/xbox_360_support/f/9/t/1625236.aspx)

XB1 users, new ports (UDP) have been added for this device:
Port 500
Port 3544
Port 4500

XB1 users, please use the "Multi-Xbox" global GameFuel or QoS rule example listed in the Gaming and Gamefuel for XBL stickies located in the FAQ Library (http://forums.dlink.com/index.php?board=304.0) if you set these features up.


http://forums.xbox.com/xbox_forums/xbox_support/xbox_one_support/f/4267/t/1634443.aspx?PageIndex=2 (http://forums.xbox.com/xbox_forums/xbox_support/xbox_one_support/f/4267/t/1634443.aspx?PageIndex=2)

For Xbox 360:
Do a network factory reset of the xbox console:
1. Press the Guide Button on your controller, go to Settings
2. Select System Settings then Network Settings
3. Select Wired Network or your wireless network when displayed
4. Select Configure Network then Additional Settings tab
5. Select Restore to Factory Defaults then confirm when prompted.
6. Turn Off the xbox then turn back on.
Check NAT status. It should be OPEN!

Any further help or setup information needed, please contact XBL support or post in the D-Link forums with your D-Link model product and we'll help you out.