• April 18, 2024, 02:11:37 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: incomplete DIR-825 revB GPL sourcecode; U-Boot  (Read 10561 times)

wimsop

  • Level 1 Member
  • *
  • Posts: 4
incomplete DIR-825 revB GPL sourcecode; U-Boot
« on: February 24, 2011, 07:01:32 PM »
Hey there! Thank you for providing the GPL sources for the DIR-825 rev.B firmware. However, it is incomplete!

The bootloader used by the device is U-Boot, which is also licensed under the terms of the GPL. Sadly these parts are missing from the source code package provided by D-Link.

Therefore I am asking you to add the U-Boot sources to the provided archive or post them here in the forum. Thanks very much!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #1 on: February 25, 2011, 07:04:48 AM »
I recommend you contact DLink directly, Moderator or Support.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

pcjunky

  • Level 2 Member
  • **
  • Posts: 66
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #2 on: February 25, 2011, 09:21:52 AM »
You should try emailing Dlink.

Can I ask you how much Dlink charged you for "copying" fees?  Also did they send you the current firmware source or an older version?

TIA


Logged

wimsop

  • Level 1 Member
  • *
  • Posts: 4
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #3 on: February 25, 2011, 12:42:09 PM »
Quote from: FurryNutz on February 25, 2011, 07:04:48 AM
I recommend you contact DLink directly
Already tried that to no avail.

Quote from: FurryNutz on February 25, 2011, 07:04:48 AM
Moderator
Will do! Who specifically would that be?

Quote from: pcjunky on February 25, 2011, 09:21:52 AM
Can I ask you how much Dlink charged you for "copying" fees?  Also did they send you the current firmware source or an older version?
Nothing, because that's what I got. Upon contacting local support here in Germany they referred me to ftp://ftp.dlink.com/GPL/ . AFAIK that's all there is. Somewhat ancient initial release versions only, incomplete for the DIR-825 :(
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #4 on: February 25, 2011, 12:44:22 PM »
Moderators: Lycan, or sesca
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

pcjunky

  • Level 2 Member
  • **
  • Posts: 66
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #5 on: February 26, 2011, 07:56:38 AM »
Quote from: wimsop on February 25, 2011, 12:42:09 PM
Nothing, because that's what I got. Upon contacting local support here in Germany they referred me to ftp://ftp.dlink.com/GPL/ . AFAIK that's all there is. Somewhat ancient initial release versions only, incomplete for the DIR-825 :(

I downloaded that source too, but never tried to build it because it seem incomplete and as you say very old.

I've only looked at the GPL licence once but I'm pretty sure Dlink is violating the agreement by not providing current buildable code. 

Logged

XP1

  • Level 1 Member
  • *
  • Posts: 5
  • XP1
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #6 on: April 26, 2011, 03:52:22 PM »
Quote from: FurryNutz on February 25, 2011, 12:44:22 PM
Moderators: Lycan, or sesca
Linked for convenience.

Lycan:
http://forums.dlink.com/index.php?action=profile;u=9

sesca:
http://forums.dlink.com/index.php?action=profile;u=20175

By the way, @wimsop, did you contact anybody and get a response? The new GPL FTP server seems to be down, as of April 26, 2011:
http://forums.dlink.com/index.php?topic=38268.0

Logged

wimsop

  • Level 1 Member
  • *
  • Posts: 4
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #7 on: April 27, 2011, 02:32:53 AM »
Quote from: XP1 on April 26, 2011, 03:52:22 PM
By the way, @wimsop, did you contact anybody and get a response? The new GPL FTP server seems to be down, as of April 26, 2011:
I did. No response from the mods though, apparently they haven't been active here for some time now. D-Link global support told me to expect a new build by the end of April, German support even gave Apr 15 as a date. Unfortunately nothing has happened yet. FTP server is working for me, nothing new to be found there, though :(
Logged

XP1

  • Level 1 Member
  • *
  • Posts: 5
  • XP1
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #8 on: April 27, 2011, 05:44:31 AM »
Quote from: wimsop on April 27, 2011, 02:32:53 AM
FTP server is working for me, nothing new to be found there, though :(
Weird. On a Verizon Internet connection, the GPL FTP server was not working. I then SSH tunneled into a Comcast Internet connection, and I was able to connect to the GPL FTP server.

Thanks for letting me know that the GPL FTP server is working, although I should have checked on different Internet connections first.
Logged

XP1

  • Level 1 Member
  • *
  • Posts: 5
  • XP1
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #9 on: April 28, 2011, 06:52:23 PM »
On the GPL FTP server, a new directory, "/DIR-825_revB/previous ver/", has a creation date of "4/28/2011 7:45 PM".

Interesting...
« Last Edit: April 28, 2011, 07:16:34 PM by XP1 »
Logged

ldpinney

  • Level 1 Member
  • *
  • Posts: 1
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #10 on: May 06, 2011, 07:25:36 PM »
Does anyone else have trouble extracting the full source code from this download?

ftp://gpl.dlink.com/DIR-825_revB/DIR-825_B1_GPL.rar

Logged

wimsop

  • Level 1 Member
  • *
  • Posts: 4
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #11 on: May 07, 2011, 02:43:39 AM »
Quote from: ldpinney on May 06, 2011, 07:25:36 PM
Does anyone else have trouble extracting the full source code from this download?
Sort of. Archive is truncated, so there is quite a bit missing. The U-boot parts extract ok and compile successfully though. You might wanna try the fully working EU version over here:
ftp://ftp.dlink.de/dir/dir-825/driver_software/DIR-825EU-B1-GPLSourceCode.tar.gz
Logged

XP1

  • Level 1 Member
  • *
  • Posts: 5
  • XP1
Re: incomplete DIR-825 revB GPL sourcecode; U-Boot
« Reply #12 on: May 07, 2011, 08:20:57 AM »
Yes, the archive "DIR825B1_FOSS205NA.rar" inside "DIR-825_B1_GPL.rar" is corrupted.

The EU GPL FTP server timed out a few times while I was getting "DIR-825EU-B1-GPLSourceCode.tar.gz". Anyway, here are the file hashes:

DIR-825_B1_GPL.rar File Hashes:
Code: [Select]
CRC32: 5125F640
MD5: 1AB85F0DAF5BB08994B8CC6D061E6C84
SHA-1: A7D96A556E18B12A6A2699CFCC6D37D7893CB65C
DIR-825EU-B1-GPLSourceCode.tar.gz File Hashes:
Code: [Select]
CRC32: F995D2E5
MD5: 20B460685D3955BCE6A935BCC2E8EB46
SHA-1: 7FCF94326FD0C3D4AD42EE0167A5C07833B49D40
Logged