• April 19, 2024, 03:51:12 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: PIR detection  (Read 7501 times)

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
PIR detection
« on: March 12, 2013, 06:03:07 PM »
Sensitivity set to  "high" with latest firmware...

today, with room temp maybe 73F... outside was 57F perhaps..

I was totally able to enter my entrance and blow by w/o motion detection into a room.

I guess perhaps my coat was near 70F?...but my head has to be at least 98F???  ::)

I did get picked up when I crossed out of my other room and removed my coat, when PIR kicked in.

Now that I have my 5222l set in a spot that works mostly well, I might be able to add video detection, and not pick up sun/cloud activity...




Logged

Budapest

  • Level 1 Member
  • *
  • Posts: 5
  • DCS-5222L
Re: PIR detection
« Reply #1 on: March 13, 2013, 03:42:36 AM »
My DCS5222l sending PIR alert every 15 minutes accurately. It's a bug. Yours? thx!
Logged
DCS-5222L

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: PIR detection
« Reply #2 on: March 13, 2013, 06:30:16 PM »
Quote from: Budapest on March 13, 2013, 03:42:36 AM
My DCS5222l sending PIR alert every 15 minutes accurately. It's a bug. Yours? thx!

Are you using the latest firmware?

INFORMATION
Camera Name   DCS-5222L
Firmware Version   1.01
Firmware Build Number   1522


This webpage INCORRECTLY states no downloads:

http://www.dlink.com/us/en/support/product/dcs-5222l-pan-tilt-zoom-cloud-camera


If you go here,

https://www.mydlink.com/support#DCS-5222L

scroll to the right, select the DCS-5222L

The download link is there...

Firmware

v1.01
Note: When upgrading firmware, make sure you also download the latest Setup Wizard if you need to set up and configure your camera again.


My laptop didn't have enough speed I guess to update the firmware... my desktop did.  I think you have to unzip the file first before proceeding.
Logged

Budapest

  • Level 1 Member
  • *
  • Posts: 5
  • DCS-5222L
Re: PIR detection
« Reply #3 on: March 14, 2013, 12:49:23 PM »
When I bought the camera, it had the latest firmware (v1.01 / 1522).
I tought it is a hardware problem, but I can see some more topic with the same issue.
So your device is fine, and not sending pir alerts every 15 minutes?
Thank You for your answer!
Logged
DCS-5222L

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: PIR detection
« Reply #4 on: March 14, 2013, 07:04:20 PM »

Are you FTP'ing photos?  That's where I did have the problem.  I haven't tried photos since upgrading, and switching to PIR only.







Logged

Budapest

  • Level 1 Member
  • *
  • Posts: 5
  • DCS-5222L
Re: PIR detection
« Reply #5 on: April 07, 2013, 09:27:48 AM »
Thank You, but I use email function if motion detected only with pir (medium sensitivity) inside a room. Everything else is working, but I get false alarm/email in every 15 minutes. So I ignore them, by now I am immune to it, I can not react if something really happens. :(
Please somebody give me advice, should I sell this camera and I buy another reliable product?
There will be new firmware or this is a hopeless thing?
Thx!
Logged
DCS-5222L