• April 16, 2024, 01:58:20 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 1.08 beta5 - doesn't work with some WD 1.5T/Green (DNS-323 see only 500G)  (Read 2931 times)

rlukawski

  • Level 1 Member
  • *
  • Posts: 10

Hi,

Hardware Version: B1
Firmware Version: 1.08 b05

Harddrive 1:WDC WD15EADS-00P8B0 (1.5T)
Harddrive 2:WDC WD15EADS-00P8B0 (1.5T)

Problem:
DNS-323 works fine with disks which have S/N lower than: WD-WMAVU0179999, for any other webs app shows only 500G instead of 1500G. i've checked web sources, one of affected function is: format_wizard_showdevlnfo()

All (i have four WD15EADS-00P8B0) disks *work perfectly fine* under regular PC, below you can see drive info (hdparm -i from linux/PC):

 Model=WDC WD15EADS-00P8B0                     , FwRev=01.00A01, SerialNo=     WD-WMAVU0180057
 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
 BuffType=unknown, BuffSize=32767kB, MaxMultSect=16, MultSect=?0?
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=18446744072344861488
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
 AdvancedPM=no WriteCache=enabled
 Drive conforms to: Unspecified:  ATA/ATAPI-1,2,3,4,5,6,7

Any suggestions ?

if you need more info, let me know please.

Regards
Rafal

« Last Edit: October 17, 2009, 12:15:47 PM by rlukawski »
Logged