• March 18, 2024, 10:48:42 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DSP-W215 does not remember that it was ON before a power failure.  (Read 18830 times)

happyhere

  • Level 3 Member
  • ***
  • Posts: 178


To reproduce
1. W215 is switched on
2. Remove power for like 1 minute (simulate power failure)
3. Plug back W215
4. Setting is now OFF.   waited few mins and is OFF

Suggestion:
It might be a safety feature not to have it default ON after plugging in.   
But I hope, it should check in the Scheduled Task history that it there is no scheduled OFF setting.

Another  limitation is the Mydlink Home App.   
There is no option to set "ON at 4:30PM only", then ON again in another xx:xx time.  It needs a tandem ON and OFF in when creating schedule
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #1 on: March 28, 2017, 10:38:14 AM »

I'll ask what the default behavior is for this. Please be patient.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #2 on: March 28, 2017, 10:57:29 AM »

Default is OFF after a power failure.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #3 on: April 30, 2017, 10:01:06 PM »

Default is OFF after a power failure.

yes.. default is OFF, I was hoping to put this W215 + Router is plug to it. :)

default off is maybe fine to prevent surge to appliance. 
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #4 on: May 01, 2017, 08:45:00 AM »

You mean your power for the router is plugged in to the DSP?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #5 on: May 12, 2017, 10:38:29 PM »

You mean your power for the router is plugged in to the DSP?

no it is not plugged to DSP :)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #6 on: May 14, 2017, 10:40:05 AM »

I would not plug the router into the DSP.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #7 on: July 22, 2017, 01:28:56 AM »


after some months, here's what I learn from DSP-W215

a. No scheduled time set, you manually press turn-ON the physical button via W215 itself, power-failure simulation and then re-applied back power,  it will NOT remember last state, it remains OFF throughout till the next schedule.

b. E.g. A scheduled time was set that it is ON between 2PM to 5PM.  Power failure happens between 2pm-5pm and power restored before 5pm.  The w215 will set it to ON after few minutes.   So I am happy on this

Summary: Power Failure scenario will work if there is a Scheduled Set on that time frame   (firmware 2.2 and mydlink home v3.07 (ios)


Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #8 on: July 22, 2017, 10:09:26 AM »

Thanks for the info. Hope this helps others.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

happyhere

  • Level 3 Member
  • ***
  • Posts: 178
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #9 on: August 27, 2017, 03:13:16 AM »


on more thing I noticed on W215, if the internet is down for say half day, the W215 will also switch OFF!! after some hour!!! 
The W215 seems NOT keeping scheduled on/off task within the device, dunno if it is safety feature that if unable to contact dlink server, it will do an OFF mode.

I hope someone release a Smart Plug that is ON when there is power failure (e.g. relay is reversed (NC - normally closed)
Logged

deanparkr

  • Level 1 Member
  • *
  • Posts: 5
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #10 on: September 17, 2017, 05:29:32 AM »

Oh wow I did not know this was the case. I'm using the smart plug with a D-Link IP cam, if the power goes off and the cam won't auto come back on this is a problem.

Its a shame D-Link doesnt make this a configurable option.  :(
Logged

jkortum

  • Level 1 Member
  • *
  • Posts: 1
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #11 on: July 20, 2020, 08:55:32 PM »

I have found a way around it by setting a schedule in advanced and set it to be always on
Logged

MartyK

  • Level 1 Member
  • *
  • Posts: 3
Re: DSP-W215 does not remember that it was ON before a power failure.
« Reply #12 on: March 08, 2021, 11:32:36 AM »

Setting a schedule that is always ON does not work.
There has to be a transition in the schedule, ie something needs to happen.
Anybody have another trick?
Logged