D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNR-202L => Topic started by: FurryNutz on January 21, 2020, 12:29:50 PM
-
Firmware: v2.05 B08 Beta 1/20/2020
Fixed:
Release item:
1. Fixed Playback issue after perpetual calendar without 2020.
Known Issues:
None.
Hopefully this will also fix bad dates beyond 2019 displaying in the DNRs web pages. :-\
Get it here:
DNR-202L (https://support.dlink.com/productinfo.aspx?m=DNR-202L)
Let us know how it works for you...
-
Known Issues:
None.
Let us know how it works for you...
Can not bring up only 1 window out of the 4 in playback by double clicking on the window you want.
I can get to it by clicking the window, then single window controller.
The double click works in live view.
It must be in the interface control file that installed in IE. It's affecting an older system F/W.
The new add on is 1.0.0.1.139
My previous with double click is 1.0.0.133 from 2016., I just tested the older dnr on IE on another windows 10 laptop.
-
I noticed after the FW update, my 4 camera view would not load correctly in IE11x32. I had been there prior to the FW update. So I rebooted the DNR and cleared all browser caches. Exited the browser then reopened it after the DNR was ready. Logged in and IE asked to allow the pluging for the DNR which I did allow.
All cameras are now seen in the 4 camera view sections:
(https://i.ibb.co/0XS7rVk/v2058-Beta-Working.png) (https://ibb.co/z5YMZH1)
I can bring up 1 camera view by double clicking on each section.
-
I can bring up 1 camera view by double clicking on each section.
In Playback??
-
I didn't try Playback as I don't have anything recorded yet. ::)
Be sure to reboot your DNR and clear out all browser caches, exit then relaunch the browser.
-
I didn't try Playback as I don't have anything recorded yet. ::)
Be sure to reboot your DNR and clear out all browser caches, exit then relaunch the browser.
I can't get rid of 1.0.0.139 nvrstreamcom control. when i remove the add on, and go to the older system to install 1.0.0.133, .139 comes back.
rebooting new system f/w will not help the old one.
at least the expoort doesn't write to that virtual 20 folder deep location anymore. straight to desktop with .139.
other laptop that does have .139 still works double click in playback. not sure why they would remove it.
manual says double click should work. this will be fun explaining to my 70+ year old parents if I upgrade them. I at least got them not to click on stuff that will break it.
*right click functions also lost in playback that were there. (never used them, doesn't much matter to me).
-
"other laptop that does have .139 still works double click in playback."
Whats the differences between this laptop and your other PC that isn't working?
Seems like if one is working and the other isn't, would be looking at the one PC that isn't working.
I didn't try Playback as I don't have anything recorded yet. ::)
Be sure to reboot your DNR and clear out all browser caches, exit then relaunch the browser.
I can't get rid of 1.0.0.139 nvrstreamcom control. when i remove the add on, and go to the older system to install 1.0.0.133, .139 comes back.
rebooting new system f/w will not help the old one.
at least the expoort doesn't write to that virtual 20 folder deep location anymore. straight to desktop with .139.
other laptop that does have .139 still works double click in playback. not sure why they would remove it.
manual says double click should work. this will be fun explaining to my 70+ year old parents if I upgrade them. I at least got them not to click on stuff that will break it.
*right click functions also lost in playback that were there. (never used them, doesn't much matter to me).
-
"other laptop that does have .139 still works double click in playback."
Whats the differences between this laptop and your other PC that isn't working?
Seems like if one is working and the other isn't, would be looking at the one PC that isn't working.
I didn't try Playback as I don't have anything recorded yet. ::)
Be sure to reboot your DNR and clear out all browser caches, exit then relaunch the browser.
I can't get rid of 1.0.0.139 nvrstreamcom control. when i remove the add on, and go to the older system to install 1.0.0.133, .139 comes back.
rebooting new system f/w will not help the old one.
at least the expoort doesn't write to that virtual 20 folder deep location anymore. straight to desktop with .139.
other laptop that does have .139 still works double click in playback. not sure why they would remove it.
manual says double click should work. this will be fun explaining to my 70+ year old parents if I upgrade them. I at least got them not to click on stuff that will break it.
*right click functions also lost in playback that were there. (never used them, doesn't much matter to me).
My bad, typo.. other laptop has .133 from 2016 f/w fresh install
never seen a dnr202l before.
Theres probably some way to remove .139 from behind the scenes. it doesn't work from internet options or manage add ons. .139 comes back even when "installing" from old 2016 dnr f/w with .133
-
with fw 2.5.8, the hdd viewer 1.3.3 is STILL borken due to belimited to 15 years of dropdown
-
"They are still working on the software. I did not get a release date. Since it is Chinese new year I will not hear back until after 1/29. I am not sure why the software isn't done since it was fixed for the other DNR products last week. They must have been waiting for the 202L firmware."
with fw 2.5.8, the hdd viewer 1.3.3 is STILL borken due to belimited to 15 years of dropdown
-
still waiting for hdd 1.3.3 fix !!!!!!!!!!!!!!!!
-
so are we!
-
Due to the Coronavirus, facilities in China and Taiwan are closed for the next week (or longer) so I may not hear back for a while.
-
::)
-
They are opening the facilities on Feb 10th.
-
Thanks for the update. ;)
-
what? Feb 10? Cant they telecommute and fix the simple fix in hdd viewer 1.3.3 ALREADY
-
ALREADY:
BETA Software - ftp://FTP2.DLINK.COM/PRODUCTS/DNR-202L/REVA/DNR-202L_HDD_VIEWER_v1.3.5.zip
::)
what? Feb 10? Cant they telecommute and fix the simple fix in hdd viewer 1.3.3 ALREADY
-
Anyone else besides geetee2 hearing beeps ever so often when the DNR is recording from the DNR?