• April 26, 2024, 07:14:15 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Video problem  (Read 10997 times)

dmi

  • Level 1 Member
  • *
  • Posts: 3
Video problem
« on: March 17, 2012, 05:40:11 AM »
I installed D-ViewCam 3.20, new DevicePack but still can not see video from the DCS 932-L. Showing is moving cubes, a few lines. New computer, Windows 7 64-bit. The same problem is also on the video display via the web interface. I tried to install video codecs, did not help. On another computer in order. Can you please help? Thank you.
Logged

RooKiED

  • Level 2 Member
  • **
  • Posts: 43
Re: Video problem
« Reply #1 on: March 17, 2012, 10:27:58 AM »
Hi dmi.
Have you tried updating to the last Device Pack 1.4.0 ?
Download, install it and see if it works out for you.
Link: ftp://files.dlink.com.au/Products/D-ViewCam/REV_A/Software/
Logged

dmi

  • Level 1 Member
  • *
  • Posts: 3
Re: Video problem
« Reply #2 on: March 17, 2012, 12:48:00 PM »
Thank you for the idea - I had version 1.3.3. So I installed 1.4, unfortunately it did not help .. The video is still bad ..
Logged

dmi

  • Level 1 Member
  • *
  • Posts: 3
Re: Video problem
« Reply #3 on: March 23, 2012, 05:02:16 AM »
Thank you for your message. On another computer, the video displays correctly. The problem is only on this computer. I bought this computer specifically for the cameras - the new Dell Vostro 460 / Intel i7-2600 / 8GB / 1TB (7200) / DVDRW / ATI 6670 1GB / W7 for 64-bit. I tried to install video codecs, the latest driver .. Nothing helped. I do not know where else he could be a problem. I need to make it work just on this computer ;( Any idea please? Thank you in advance for your help ..
Logged

yendor1966

  • Level 1 Member
  • *
  • Posts: 7
Re: Video problem
« Reply #4 on: April 03, 2012, 02:25:06 PM »
can you see video through a web browser?

Try booting up to safe mode with networking see if that works.

Try downloading D-View Cam 3.11 instead, I heard that 3.2 is kinda buggy from the
posts I have seen.  I have misplaced the url for this sorry, but I know I have found it
in these posts somewhere.

here it is:   ftp://ftp.dlink.com/Multimedia/D-View%20Cam/
« Last Edit: April 03, 2012, 02:30:35 PM by yendor1966 »
Logged

gda_73

  • Level 1 Member
  • *
  • Posts: 2
Re: Video problem
« Reply #5 on: April 06, 2012, 03:46:19 PM »
I have the exact same issue to a T.  Can't figure this one out but I am suspecting it has something to do with the mpeg codec.
Logged

Royalton

  • Level 1 Member
  • *
  • Posts: 4
Re: Video problem
« Reply #6 on: April 08, 2012, 09:07:39 AM »
I downloaded version DViewCam 3.20 and now I can't view the cam on the native webpage from my DCS-920's.   The page comes up but there is no video feed.  Neither Active X or Java works.....what got  sgragged ??????
Logged

oysteinm

  • Level 1 Member
  • *
  • Posts: 1
Re: Video problem
« Reply #7 on: May 29, 2012, 02:00:25 PM »
I got the same problem. Video work great on another computer (also running windows 7 64bit).. Stillpicture work fine though.

Tried to install Mainconsept MJPEG codec; didn't help.
Tried to disable firewall and antivirus; didn't help.
Tried two different browsers, IE and Opera; didn't help.
Tried different quality settings; didn't help.
Installed newest firmware and d-link software; didn't help.
Tried both Java and ActiveX; no diff.
Tried from IE thru a VM running XP; didn't help.
Logged

gda_73

  • Level 1 Member
  • *
  • Posts: 2
Re: Video problem
« Reply #8 on: June 26, 2012, 07:32:34 PM »
I figured it out.  Windows 7 Mpeg codec issue.

Install this and your good to go!
http://download.cnet.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
Logged

Royalton

  • Level 1 Member
  • *
  • Posts: 4
Re: Video problem
« Reply #9 on: June 30, 2012, 06:44:06 AM »
But I'm running Vista .... how can I get codecs for it ??????  And why did downloading DVewCam 3.20 scrag the old codecs...everything worked fine until I downloaded it !!!!!!
Logged