• March 19, 2024, 03:41:13 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 [2] 3

Author Topic: DCS-2330L Firmware 1.10.07? (DO NOT USE!!!)  (Read 21609 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2330L Firmware 1.10.07?
« Reply #15 on: July 24, 2015, 08:38:12 AM »

Possible that the update has been cancelled enough to stop the notice from appearing. I think if your in the NA or USA region, the updates only look in this specific region and not WW as other regions handle MyDlink differently.

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

mhung0793

  • Level 1 Member
  • *
  • Posts: 2
Re: DCS-2330L Firmware 1.10.07?
« Reply #16 on: August 07, 2015, 02:35:07 PM »

The wireless connection worked for me, but, the camera sensed several false detections a day due to camera aperture adjustment.  Overall, I liked 1.10.07 better because the recorded video does not have 2 second lag time after the triggered event.  Hopefully, DLINK can release a new fix for 1.10.*. 
By the way, my wireless disconnection issue has not happened since I enabled to reboot (under system icon) daily.
Logged

myUsernamedpc

  • Level 1 Member
  • *
  • Posts: 5
Re: DCS-2330L Firmware 1.10.07?
« Reply #17 on: August 09, 2015, 09:56:09 PM »

I'm having the same problem with my DCS-2330L.  Shortly after the camera was upgraded to the latest firmware (1.10.07) via mydlink, it has been very unstable.  I've reset back to factory, but the same result. 

How can I roll back to 1.02?  I tried reloading the .bin via the user interface.  It acts like it's loading, but after it reboots, it still shows as 1.10.07.

Dlink support was pretty useless.  They told me to download the wizard from mydlink.com and run it.  I've tried this with no luck. 

Any suggestions would be greatly appreciated. 
Logged

quixy

  • Level 1 Member
  • *
  • Posts: 11
Re: DCS-2330L Firmware 1.10.07?
« Reply #18 on: August 10, 2015, 12:46:44 AM »

I'm having the same problem with my DCS-2330L.  Shortly after the camera was upgraded to the latest firmware (1.10.07) via mydlink, it has been very unstable.  I've reset back to factory, but the same result. 

How can I roll back to 1.02?  I tried reloading the .bin via the user interface.  It acts like it's loading, but after it reboots, it still shows as 1.10.07.

Dlink support was pretty useless.  They told me to download the wizard from mydlink.com and run it.  I've tried this with no luck. 

Any suggestions would be greatly appreciated.

You have to go back to 1.00B04, then you'll be able to go back to 1.02. The 1.02 file will stop at (I think) 83% every single time.

The 1.10 firmware almost bricked my cameras, so I wasn't too pleased with D-Link. The NVR app for Android has been broken for months now too. Their router software works well enough, but the quality of everything else varies greatly.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2330L Firmware 1.10.07?
« Reply #19 on: August 10, 2015, 07:47:50 AM »

Can you provide a bit more information regarding what is "unstable" about the camera when this version of FW is loaded?
Also be sure to enabled both uPnP and uPnP Port Forwarding on the camera.
There is a new plug-in that replaces the Java plug in.

I've asked D-Link to review this thread.


I'm having the same problem with my DCS-2330L.  Shortly after the camera was upgraded to the latest firmware (1.10.07) via mydlink, it has been very unstable.  I've reset back to factory, but the same result. 

How can I roll back to 1.02?  I tried reloading the .bin via the user interface.  It acts like it's loading, but after it reboots, it still shows as 1.10.07.

Dlink support was pretty useless.  They told me to download the wizard from mydlink.com and run it.  I've tried this with no luck. 

Any suggestions would be greatly appreciated.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

myUsernamedpc

  • Level 1 Member
  • *
  • Posts: 5
Re: DCS-2330L Firmware 1.10.07?
« Reply #20 on: August 10, 2015, 03:39:09 PM »

It's unstable as in:
1. I can sometimes log in to camera's user interface and it works fine: I can see live video, change configurations, etc.  Then 5 minutes later, everything is slow, there is no live video, and previous configurations are wiped and back to original settings.
2. DNR 202L can detect camera, but can't see live feed.  It eventually gives me an "X" and says camera is disconnected.
3. Mydlink app on iphone would sometimes says camera is online, sometimes offline. 
4. When camera is working, it detects motion every minute or so even without any motions.

UPnP is enabled.  I will check UPnP port forwarding later tonight. 

In addition to the DCS-2330L, I have a DIR-850L, DNR-202L, 1 DCS-932L, and 2 DCS-934L.  All are working fine except DCS-2330L.  I started experiencing problems soon after upgrading to 1.10.07. 


Can you provide a bit more information regarding what is "unstable" about the camera when this version of FW is loaded?
Also be sure to enabled both uPnP and uPnP Port Forwarding on the camera.
There is a new plug-in that replaces the Java plug in.

I've asked D-Link to review this thread.



Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2330L Firmware 1.10.07?
« Reply #21 on: August 11, 2015, 07:01:15 AM »

Are you using Dynamic or Static IP addresses on the cameras and DNR?
If your still using the routers default DCHP IP address pool of 192.168.0.100 thru .199, I recommend doing the following for the Cameras and DNR:
Set a static IP address on each device: DNR to 192.168.0.20, 932L to 192.168.0.32, 934L to 192.168.0.34, 2330L to 192.168.0.23.

Ensure uPnP Port Forwarding is enabled on ALL cameras.

What browser are you using to connect to the web pages? I recommend IE or FF.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

quixy

  • Level 1 Member
  • *
  • Posts: 11
Re: DCS-2330L Firmware 1.10.07?
« Reply #22 on: August 11, 2015, 11:17:13 AM »

I had the exact same problems. Just downgrade to 1.00 and then upgrade back to 1.02. If this firmware wasn't  problematic D-Link wouldn't have pulled it. No sense wasting time messing with all your other cameras that are working properly.

It's unstable as in:
1. I can sometimes log in to camera's user interface and it works fine: I can see live video, change configurations, etc.  Then 5 minutes later, everything is slow, there is no live video, and previous configurations are wiped and back to original settings.
2. DNR 202L can detect camera, but can't see live feed.  It eventually gives me an "X" and says camera is disconnected.
3. Mydlink app on iphone would sometimes says camera is online, sometimes offline. 
4. When camera is working, it detects motion every minute or so even without any motions.

UPnP is enabled.  I will check UPnP port forwarding later tonight. 

In addition to the DCS-2330L, I have a DIR-850L, DNR-202L, 1 DCS-932L, and 2 DCS-934L.  All are working fine except DCS-2330L.  I started experiencing problems soon after upgrading to 1.10.07. 


Can you provide a bit more information regarding what is "unstable" about the camera when this version of FW is loaded?
Also be sure to enabled both uPnP and uPnP Port Forwarding on the camera.
There is a new plug-in that replaces the Java plug in.

I've asked D-Link to review this thread.



Logged

myUsernamedpc

  • Level 1 Member
  • *
  • Posts: 5
Re: DCS-2330L Firmware 1.10.07?
« Reply #23 on: August 12, 2015, 09:44:56 AM »

Thanks, quixy!  Can you please provide instructions on how to downgrade to version 1.0?  Did you have the camera hard wired to router or can it be done wirelessly?  My camera is attached to the ceiling outside and power cord is glued on to stucco.  I really don't want to have to take it down.  Thanks again!


I had the exact same problems. Just downgrade to 1.00 and then upgrade back to 1.02. If this firmware wasn't  problematic D-Link wouldn't have pulled it. No sense wasting time messing with all your other cameras that are working properly.


Logged

quixy

  • Level 1 Member
  • *
  • Posts: 11
Re: DCS-2330L Firmware 1.10.07?
« Reply #24 on: August 12, 2015, 10:07:45 AM »

I didn't try to do it wirelessly, but my cameras had slowed to a crawl and it probably wouldn't have worked.  I bought 50 feet of cheap ethernet cord from Amazon for the same reason. Just go to the support website and download both firmware versions. Upload the 1.0 .bin file like you did the other time, then the camera should be responsive again and you can upload the 1.02 .bin.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2330L Firmware 1.10.07?
« Reply #25 on: August 12, 2015, 10:37:42 AM »

Please be wired to the camera with a LAN cable. We found that doing a factory reset on the camera, then uploading FW, then factory reset again seem to ensure a good installation of FW.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2330L Firmware 1.10.07?
« Reply #26 on: August 12, 2015, 10:41:13 AM »

FYI, I don't see v1.10.07 listed on the MDL or main D-Link web site so I presume D-Link may have pulled the file. So for now, everyone should be using v1.02 which is the most current on both sites.

Thank you.
« Last Edit: August 12, 2015, 10:48:36 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

myUsernamedpc

  • Level 1 Member
  • *
  • Posts: 5
Re: DCS-2330L Firmware 1.10.07?
« Reply #27 on: August 12, 2015, 11:18:21 AM »

Sounds good.  I have a 100' cat5e somewhere that I'll dig up.  Thanks for everyone's suggestions. 

I'll post on here my outcome.  I'm sure a lot of other people are having the same issue.


I didn't try to do it wirelessly, but my cameras had slowed to a crawl and it probably wouldn't have worked.  I bought 50 feet of cheap ethernet cord from Amazon for the same reason. Just go to the support website and download both firmware versions. Upload the 1.0 .bin file like you did the other time, then the camera should be responsive again and you can upload the 1.02 .bin.
Logged

myUsernamedpc

  • Level 1 Member
  • *
  • Posts: 5
Re: DCS-2330L Firmware 1.10.07? (DO NOT USE!!!)
« Reply #28 on: August 24, 2015, 01:44:19 PM »

Finally got a chance to rollback to 1.00 then 1.02. It took about 20 minutes to go to 1.00 and I actually had to try a few times. I was afraid that it wasn't the firmware that was the problem. Once 1.00 went through, going to 1.02 took less than 5 minutes.

The camera is back up and running stable for a full day. The only problem I have is it's not sending email with motion detection.  I'll have to look into this further.  For now, I enabled email notification with my dnr-202L. With dnr, it only sends 1 pic with motion detection.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DCS-2330L Firmware 1.10.07? (DO NOT USE!!!)
« Reply #29 on: August 24, 2015, 04:56:06 PM »

Glad you got it working and back on released FW.

Users may want to contact D-Link support directly on the phone and ask about some of the issues that are seen on v1.02.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: 1 [2] 3