• March 18, 2024, 09:34:05 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DGS-1016D Power Supply  (Read 16716 times)

slybunda

  • Level 1 Member
  • *
  • Posts: 1
DGS-1016D Power Supply
« on: March 16, 2010, 07:21:24 PM »

hello i have a problem with my dlink switch. its is a model DGS-1016D. the power supply in the switch has become faulty. i have tested the switch itself using a 9.6v battery and the switch works fine but i need a new power supply for it.

question is, whats the output voltage of the internal power supply. the input voltage says its 100-240v and 1amp max current. since i got the switch working from a 9.6v battery im guessing im close to or probably at the correct working voltage for the switch. most other dlink switches that use an external power supply work in the 7.5v-12v range.

if i knew the actual output voltage of the internal power supply i could make a replacement supply which would not risk damaging the switch itself.

below is a picture of the power supply that has gone faulty.


thanks
« Last Edit: March 16, 2010, 07:24:04 PM by slybunda »
Logged

pclogicnz

  • Level 1 Member
  • *
  • Posts: 1
Re: DGS-1016D Power Supply
« Reply #1 on: September 14, 2010, 03:24:43 PM »

Did you find a solution for this. I have the same model and dead power supply.
Logged

Rara Avis

  • Imperator
  • Level 2 Member
  • **
  • Posts: 76
Re: DGS-1016D Power Supply
« Reply #2 on: September 15, 2010, 10:24:31 AM »

I have a PS in my parts box that looks the same at a cursory glance.  With one exception, mine has a label stating output on the main capacitor.  I can't say that I know this is the right PS (I have no idea where this PS came from), and any information is at your own risk, but this may help.



I would have just told you the text of the label, but this way I get a chance to pawn the proper ID off on you.
Logged
Nullum magnum ingenium sine mixtura dementiae fuit. - Seneca
There has never been a great genius without a element of madness.

MattFletcher

  • Level 1 Member
  • *
  • Posts: 2
Re: DGS-1016D Power Supply
« Reply #3 on: November 14, 2010, 03:54:06 AM »

Could the poster tell me which 2 cables outof the 4 that go to the switch from the psu are the live and netual please.

and Rara, did you get my PM?? thanks

Matt
Logged

frans.demol

  • Level 1 Member
  • *
  • Posts: 1
Re: DGS-1016D Power Supply
« Reply #4 on: December 06, 2010, 04:49:17 AM »

I have 2 switches DGS-1016D & DGS-1024D which both use the same type PSU (230V in, 12V 3.3Amp OUT)

I want to replace the PSU by using a power adapter (12V, 3,3Amp) and simply connecting a female jack to the power input at the switch print board.

Can anyone tell me what voltages i have to connect to the 4 cables connected to the print board? i have 2 yellow and 2 black. i suppose the 2 yellow are 2 x 12V & the 2 black are 2 x gnd?
Logged

funkbiscuit

  • Level 1 Member
  • *
  • Posts: 2
Re: DGS-1016D Power Supply
« Reply #5 on: January 07, 2011, 06:07:46 AM »

If anyone has a dead PSU that they'd like to get rid of i'd appreciate it.

Logged

warriorking

  • Level 1 Member
  • *
  • Posts: 1
Re: DGS-1016D Power Supply
« Reply #6 on: March 05, 2011, 10:39:15 AM »

the psu is NAD-116, anybodt got the schematics for psu?
Logged