• March 28, 2024, 03:15:08 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Camera network and video stream problem  (Read 8010 times)

cyclonmaster

  • Level 1 Member
  • *
  • Posts: 8
Camera network and video stream problem
« on: August 01, 2017, 06:04:27 PM »

Camera network and video stream problem

Camera Name: DCS-942LB
Firmware Version: 2.10.07
Hardware Version: B

Tested on 3 cameras, same models and same configuration.

Problem/Failed: Everything working fine during initial setup and run.
But after 1 day test run,
Camera failed to stream video through http://IPADDRESS/video/mjpg.cgi or mobile app or DLink Web
Failed to ping the IP address assigned to the camera.
Cannot open camera menu from the web(through IP address)
IP Camera web server hang

Only solution: Recycle power
Back to default Time & Date: 2015/1/1 20:00:00

TEST 1: Default setting/untouched.
IP Address: 10.17.96.33:8080
Result: Had a problem as per describe above

TEST 2: Replace camera
Replace D-Link DCS-942L(S/N:R36U6G7000568) with New D-Link DCS-942L(S/N:R36U6GA000171) and run on original LAN(10.17.96.33:8080)
Result: Had a problem as per describe above

TEST 3: Change IP
10.17.96.34:8080 is used by another brand camera(CameraX) which is working fine for more tha 6 months.
Replace 10.17.96.34:8080 with 10.17.96.33:8080.
So new setup:
CameraX: 10.17.96.33:8080
DCS-942L: 10.17.96.34:8080

Result:
CameraX with IP 10.17.96.33:8080 working fine after 1 day test run.
DCS-942L with IP 10.17.96.34:8080 failed. Had a problem as per describe above

TEST 4: Camera setting
Disable Camera setting Network UPnP

Result: Had a problem as per describe above

TEST 5: Network port
Change current port 8080 to port 80

Result: Had a problem as per describe above

TEST 6: Firmware update
Update Firmware 2.10.07 to 2.12.04

Result: Had a problem as per describe above

Conclusion:
This will not solve the problem:
1) Default/untouched setting
2) Change camera
3) Change IP address
4) UPnp disable/enable in camera setting
5) Change network port
6) Firmware update

Other camera brand working fine with the same setting as in DSC-942L.
Only DCS-942L always having hang problem. Restart camera everyday is not a solution.

Please advice. Thank you.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Camera network and video stream problem
« Reply #1 on: August 02, 2017, 10:17:44 AM »

Link>Welcome!

  • What region are you located?

What Mfr and model is the main host router?
What wireless modes are you using?


I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.10 and .11  DHCP

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

cyclonmaster

  • Level 1 Member
  • *
  • Posts: 8
Re: Camera network and video stream problem
« Reply #2 on: August 03, 2017, 06:26:21 PM »

I'm from Malaysia.

I'm using office internet connection. Not sure what is the router and the configuration since it is in the server room.
I've been testing in wired mode using static IP.

I've been testing with uPnP enable/disable, no luck.

Will try uPnP and uPnP Port Forwarding both enabled and report back the result.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Camera network and video stream problem
« Reply #3 on: August 04, 2017, 08:38:47 AM »

Possible ISP and main host router issue. Can you try the camera at home as a test?
May need to ask your network admin for help and information on this as well and configuration with the work networking.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

cyclonmaster

  • Level 1 Member
  • *
  • Posts: 8
Re: Camera network and video stream problem
« Reply #4 on: August 07, 2017, 12:44:03 AM »

Hi,

I did a try uPnP and uPnP Port Forwarding both enabled. Same problem.
I test it at home, it work fine. in other office also working fine.

I did not have any access to internet setting in office. Why only Dlink camera had this problem?We have another camera F-Series from China which working fine.

Is there any specific setting in router/modem that had to follow Dlink requirement to make it work without hang?

Please advice.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Camera network and video stream problem
« Reply #5 on: August 07, 2017, 06:34:53 PM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

cyclonmaster

  • Level 1 Member
  • *
  • Posts: 8
Re: Camera network and video stream problem
« Reply #6 on: August 23, 2017, 07:44:12 PM »

As a work around solution, I setup the reboot schedule for the IP camera to reboot every 7am. Unfortunately, the reboot did not happen at time. The camera is completely died. Only after recycle power the camera will recover it and it work again. This happen on all 3 IP Camera we have. This only happen at our office network. Tested at home it did working fine, but after 1-2 weeks, the same problem happen. Need to reboot the camera. Sometimes, after reboot, the camera did not working as per normal because all the setting is factory reset by itself. I need to reconfigure it back again.

What is the root cause of this problem? Please advice.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Camera network and video stream problem
« Reply #7 on: August 23, 2017, 08:09:13 PM »

What Mfr and model is the main host router?
What wireless modes are you using?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

cyclonmaster

  • Level 1 Member
  • *
  • Posts: 8
Re: Camera network and video stream problem
« Reply #8 on: August 23, 2017, 08:50:37 PM »

Office:
Host Router manufacturer & model: not sure/unknown
Wireless mode: Wired

Home:
Host Router manufacturer & model: Tenda D151
Wireless mode: Wired & Wireless
Logged

cyclonmaster

  • Level 1 Member
  • *
  • Posts: 8
Re: Camera network and video stream problem
« Reply #9 on: September 04, 2017, 07:10:46 PM »

Update:

Office:
Host Router manufacturer & model: Dlink DSL-2730E
Wireless mode: Wired
Logged

cyclonmaster

  • Level 1 Member
  • *
  • Posts: 8
Re: Camera network and video stream problem
« Reply #10 on: September 10, 2017, 06:32:47 PM »

Hi all, is there any update on how to fix this problem?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Camera network and video stream problem
« Reply #11 on: September 11, 2017, 09:29:29 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.