• April 23, 2017, 01:06:18 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Precise EIRP (AP tx power) setup  (Read 268 times)

mzachar

  • Level 1 Member
  • *
  • Posts: 1
Precise EIRP (AP tx power) setup
« on: February 25, 2017, 08:09:03 AM »

Hi,

In AP configuration menu, when it comes to setting up EIRP (AP output/tx power) this setting allows for choosing % only, not specific units in dBm or mW.

1. What does 100% mean? Is it max allowed AP transmit power for a given regulatory domain?
2. How specific channel configured on AP influences given % of AP power? For example, channels from 36 to 48 (5150-5250 MHz) allow for max regulatory power of 23dBm (200mW), while channels from 100 to 140 (5470-5725 MHz) allow for max power of 30dBm (1000mW).
3. What is EIRP for each AP when I have set 40% and some APs are in 36-48 channels and others are in 100-140 channel range?
4. To which power unit this % applies to? For example, 10% setting for channel 36 means 2,3dBm or 20mW? dBm are logarithmic not linear so 4,6dBm (20%) is NOT 40mW.
« Last Edit: February 25, 2017, 08:15:15 AM by mzachar »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 41794
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Precise EIRP (AP tx power) setup
« Reply #1 on: February 26, 2017, 05:46:40 PM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting