I have updated the firmware on my DNS 345 on the last week. Before I was using the original one -1.0. After updating I have concerned with the following: If I copy bigger (>5 Gb) files to the DNS 345 after 3-4 Gb Data transfer is getting be always very slow (1000-2000 Kbyte/sec). With the original firmware it never happened, the transfer rate was always ~50 Mbyte/sec.
I have 4 HDD’s in, and I have CAT6 cables on the pipeline. Nothing was changed, only the firmware…
Do you have any ideas how can I fix this problem? Thanks in advance!