The Graveyard - Products No Longer Supported > DIR-816L

help dlink dir-816l b1 bugs port fowarding

(1/4) > >>

faz5349:
hi i purchase a dlink dir-816l rev b1 that support unifi network from malaysia  everything work fine when connecting to the internet but i seems  to have problem with port forwarding and open port , i download this firmware http://global.dlink.com.sg/site_support/DIR-816L/Firmware/DIR816L_FW200SGb05.zip (vlan custom firmware) can someone help me to fix it ,i already try setting the port forwarding/virtual server/application rules but still fail to open port and fowarding

FurryNutz:
ink>Welcome!


* Are you wired or wireless connected to the router?
* Has a Factory Reset been performed?
* Was a Factory Reset performed before and after any firmware updates then set up from scratch?  Link> >FW Update Process

* Was the router working before any firmware updates?
Internet Service Provider and Modem Configurations

* What ISP Service do you have? Cable or DSL?
* What ISP Modem Mfr. and model # do you have?
Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.

* Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
* Ensure devices are set to auto obtain an IP address.
* If IPv6 is an option on the router, select Local Connection Only under Setup/IPv6.
* Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.
* Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.

faz5349:

--- Quote ---Are you wired or wireless connected to the router?
--- End quote ---
both

--- Quote ---Has a Factory Reset been performed?
--- End quote ---
YES
--- Quote ---Was a Factory Reset performed before and after any firmware updates then set up from scratch?
--- End quote ---
i already try both and after


--- Quote ---Was the router working before any firmware updates?
--- End quote ---
no,by default the port forwarding does not

--- Quote ---What ISP Service do you have? Cable or DSL?
--- End quote ---
DSL connect via ppoe vlan 600


--- Quote ---What ISP Modem Mfr. and model # do you have?
--- End quote ---
dir 816l rev b1 firmware 2.00 sg (support unifi malaysia)


--- Quote ---Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.

    Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
    Ensure devices are set to auto obtain an IP address.
    If IPv6 is an option on the router, select Local Connection Only under Setup/IPv6.
    Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.
    Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.

--- End quote ---

i already try those method i can confirm its a firmware problem ,btw i have a dlink dir 615 g2 the setting for port forwarding is the same like this dir 816l and it work perfectly ,can someone give me another opinion on solving this http://global.dlink.com.sg/site_support/DIR-816L/Firmware/DIR816L_FW200SGb05.zip firmware port  forwarding problem or give me a link for a new version of dlink dir-816l rev b1 firmware that support vlan 600

FurryNutz:
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

faz5349:

--- Quote ---I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
--- End quote ---
ok

at the mean time ,can anyone check  the router if my setting is wrong  here is the ip adress of the router

http://wifistream.dlinkddns.com:8080/

the username is admin password is blank

i cant open the port 2222 and port 80 of the router web admin and shareport web access are fine  :)

Navigation

[0] Message Index

[#] Next page