• March 28, 2024, 04:43:24 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How to Set DST setting under FW 1.06.06  (Read 2632 times)

baleian

  • Level 1 Member
  • *
  • Posts: 10
How to Set DST setting under FW 1.06.06
« on: September 19, 2015, 10:26:54 AM »

I'm trying to set the DST setting for my camera running FW 1.06.06.  I've tried connecting through the web interface, (ie. http://ip_address/eng/liveView.cgi or http://ip_address/eng/mainFrame.cgi), but can't seem to find the setting.

I should note, that on the live view tab of the web-interface, it asks me to download the NCS plug-in, but the link just returns an error File Not Found.

Any thoughts?

Thanks in advance!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: How to Set DST setting under FW 1.06.06
« Reply #1 on: September 19, 2015, 10:50:56 AM »

What browser are you using?
Try IE or FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

baleian

  • Level 1 Member
  • *
  • Posts: 10
Re: How to Set DST setting under FW 1.06.06
« Reply #2 on: September 20, 2015, 09:38:24 AM »

I have been using Chrome, but have since tried in both FF and Edge.  All three load the website fine (http://192.168.2.30/eng/liveView.cgi), but it still asks for the NCS plug-in, but the link appears to be a dead link.

I guess, I need one of two things;

1. Does someone have the exact web address to the cam that will allow me to change the DST setting.
 or
2. Is there another site available to download the NCS plug-in?
Logged