D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-960L => Topic started by: FurryNutz on December 18, 2017, 12:15:00 PM

Title: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on December 18, 2017, 12:15:00 PM
Firmware:   v1.06 B01   11/30/2017   NA Region!
Revision Info:

Problems Resolved:
Note:
This release is to patch the WPA2 Key Reinstallation Attack (KRACK) Security Vulnerabilities affecting this product.
The beta firmware will be followed up by a fully quality test release in approximately 4 weeks.
A WPA2 wireless protocol vulnerability was reported to CERT//CC and public disclosed as: VU#228519 - Wi-Fi Protected Access II (WPA2) handshake traffic can be manipulated to induce nonce and session key reuse.
The following CVE IDs have been assigned to VU#228519. These vulnerabilities in the WPA2 protocol:
• CVE-2017-13077: reinstallation of the pairwise key in the Four-way handshake
• CVE-2017-13078: reinstallation of the group key in the Four-way handshake
• CVE-2017-13079: reinstallation of the integrity group key in the Four-way handshake
• CVE-2017-13080: reinstallation of the group key in the Group Key handshake
• CVE-2017-13081: reinstallation of the integrity group key in the Group Key handshake
• CVE-2017-13082: accepting a retransmitted Fast BSS Transition Re-association Request and reinstalling the pairwise key while processing it
• CVE-2017-13084: reinstallation of the STK key in the PeerKey handshake
• CVE-2017-13086: reinstallation of the Tunneled Direct-Link Setup (TDLS) PeerKey (TPK) key in the TDLS handshake
• CVE-2017-13087: reinstallation of the group key (GTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame

New Features:
NONE.

D-Link posted DCS-960L Rev A firmware which can be downloaded here: DCS-960L (ftp://ftp2.dlink.com/SECURITY_ADVISEMENTS/DCS-960L/REVA/DCS-960L_REVA_FIRMWARE_PATCH_v1.06.01_BETA.zip).

NOTE: Be sure that your wireless signal on the main host router is good and signal is strong with the camera if it's connected wirelessly before upgrading FW.

Please post your comments and observations as a reply to this thread.

 :)  ;)  :)
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Beta - Comments & Observations
Post by: FurryNutz on December 18, 2017, 12:42:33 PM
Loaded my 960L to day. Will post if I find anything.  ;)
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Beta - Comments & Observations
Post by: GreenBay42 on April 09, 2018, 08:48:08 AM
Official (no longer BETA) Release - April 9, 2018

ftp://FTP2.DLINK.COM/PRODUCTS/DCS-960L/REVA/DCS-960L_REVA_FIRMWARE_v1.06B01.zip (ftp://FTP2.DLINK.COM/PRODUCTS/DCS-960L/REVA/DCS-960L_REVA_FIRMWARE_v1.06B01.zip)
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on April 09, 2018, 10:09:58 AM
Thank you Sir.  ;)
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: happyhere on September 09, 2018, 12:32:04 AM

updated 1 of 3 DCS-960L from firmware 1.03 to 1.06.  No reset done, so far it is working fine.

Note on firmware 1.03, the HTTPS will crash if continuous video feed, the HTTP will work fine and need reboot to regain https.
The  v1.06 is stable  (thumbs up)
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on September 09, 2018, 02:13:27 PM
Enjoy.
 ;)
{quote author=happyhere link=topic=72829.msg298032#msg298032 date=1536478324]

updated 1 of 3 DCS-960L from firmware 1.03 to 1.06.  No reset done, so far it is working fine.

Note on firmware 1.03, the HTTPS will crash if continuous video feed, the HTTP will work fine and need reboot to regain https.
The  v1.06 is stable  (thumbs up)
[/quote]
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 14, 2020, 02:53:09 PM
I have to post a problem with the 960L that is generating a ticking sound coming from the camera when I enable the microphone and heard on my Mac Book Pro using OSX 10.14.6 on FF ESR v52.9.0. Goes away when I disable it. The other two cameras don't do this.

Ticking sound is faster than 1 second interval. Sound remains even if I move the camera or tap the cameras case. Other sounds can be heard thru the ticking sound. I moved the camera around to see if there was any interference. No.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: GreenBay42 on January 15, 2020, 08:44:38 AM
Is the ticking only coming through the microphone or is it something physical (like IR filter getting stuck)?  Live view and recorded video?
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 15, 2020, 09:20:15 AM
Not sure. I put my ear up close to the camera case and don't hear anything coming from the camera. I didn't change the IR setting and will try that. The sound came from my laptop speakers while using the portal page and when I enabled the speaker audio on the cameras page. It stopped when the audio was disabled. Live view.

I'll check the IR settings when I get home after work.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: GreenBay42 on January 15, 2020, 09:54:43 AM
Hmm. Could be some feedback/interference with your speakers maybe?

Can you record something and see if the sound comes from the recording (use a different source to listen to rule out the laptop speakers).
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: RYAT3 on January 15, 2020, 10:34:52 AM
I am a couple f/w behind but I've always heard that through the phone app in 960l and 2630l.

The 2630l takes it a step further, like it's talking that you can't make out.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 15, 2020, 12:24:25 PM
I don't think so. I had my mac book pro 2018 over at my desk far away from the camera. At least 25 feet so. This doesn't sounds like a audio feedback kind of problem. Sounds like a ticking sound happening like when you hear a clocks second hand click however this is about double time and faster than a second hand clock tick. Repetitive and continuous. I can hear other sounds coming from the camera like someone talking near the camera, it picks voices up ok. Just this ticking is in the foreground of the audio when enabled.

I'll plug in some headphones to the laptop and see what I hear.

Hmm. Could be some feedback/interference with your speakers maybe?

Can you record something and see if the sound comes from the recording (use a different source to listen to rule out the laptop speakers).
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: GreenBay42 on January 15, 2020, 12:30:17 PM
Did it just start or has it always done that?
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 15, 2020, 01:26:14 PM
I don't honestly know. I haven't messed with the portal in some time for my cameras.  ::)
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: GreenBay42 on January 15, 2020, 01:28:32 PM
Same ticking through app or only portal?
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 15, 2020, 01:30:43 PM
I just checked the app on my iphone here at work. It's ticking thru the app as well.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: GreenBay42 on January 15, 2020, 01:39:57 PM
Neato. Did you drop the camera recently?  8)

Sounds like a hardware issue if you are hearing it through multiple sources.

Definitely move the camera when you get home and try again. Ticking usually is interference but if it happens in multiple locations the microphone is probably broke.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 15, 2020, 02:10:13 PM
Ah NO.  :P  Been sitting on top of a refrigerator upstairs.

I'll move it and see. I might downgrade the FW as a test.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: RYAT3 on January 15, 2020, 02:42:35 PM
Neato. Did you drop the camera recently?  8)

Sounds like a hardware issue if you are hearing it through multiple sources.

Definitely move the camera when you get home and try again. Ticking usually is interference but if it happens in multiple locations the microphone is probably broke.

All 3 are in different locations in my place. 
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 15, 2020, 04:01:49 PM
Ok so I got home and took the camera and placed it over by my PC desktop. Powered ON and guess what, no ticking. I listed with a PC and my phone app.  :o
I put the camera back in it's original spot and again, no ticking. Wonder if after last FW update and reset, was in some bad state.

I'll call it fixed for now. I'll check back on it in a few days to make sure it still working right.  ???
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: GreenBay42 on January 22, 2020, 01:47:58 PM
Any ticking or still good?
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 22, 2020, 02:05:43 PM
I just checked again with my iPhone, not hearing anything. I Think the camera got in some bad state and a power cycle cleared the state. Camera is working well. No ticking.  ;D
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: GreenBay42 on January 22, 2020, 02:09:40 PM
Ok good.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on January 22, 2020, 02:11:08 PM
We can call this solved.  ;)
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: sharpeagle on March 12, 2020, 04:00:57 PM
Hi guys, I saw two more firmware versions since 1.06, which are listed on the same ftp location as 1.06 (ftp://ftp2.dlink.com/PRODUCTS/DCS-960L/REVA/).
It's about 1.07 (June 2019) and 1.09 (December 2019)
Tried to update my 960L (hardware version A1) with each of them but no luck. When i click "upload" I get some activity of the browser, I see the remote http port connection established in system connections list, but camera freezes (no response to a new web session attempt). Used both http and https. Nada. Upon reboot, the old firmware is still there, settings also, nothing bricked.
What's with these 2 new versions? Shall I try the upgrade using sdcard and recovery mode? (not sue if possible with this model though...).
Thanks!
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: sharpeagle on March 13, 2020, 12:50:59 AM
I managed to upgrade, but I had to do a factory default first.
Exported the config, factory reset, uploaded firmware, imported back the config.
Consider it solved.
Title: Re: New - DCS-960L - Firmware Version v1.06 B01 Official - Comments & Observations
Post by: FurryNutz on March 13, 2020, 06:09:49 AM
Thanks for letting us know your process and it worked.
Enjoy.  ;)