• November 28, 2021, 01:31:59 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS-825L not work  (Read 1924 times)


  • Level 1 Member
  • *
  • Posts: 1
DCS-825L not work
« on: July 02, 2015, 11:57:02 PM »

Hi guys,

I've got a problem with my DCS-825L camera. Yesterday I updated the mydlink Baby Camera Monitor and when I tried to connect with te BabyCam, it showed me a message to Update the Firmware. I pressed the OK button and the process finished ok, but the camera showed the PWR LED in solid RED for about 4 hours. I tried to reset the camera using the RST button, but it not respond.

Here you are the camera data if you will help me:
  • Hardware Version: A
  • Firmware Loaded: 1.0 (before updating the firmware)

Thank you in advance.

Best regards,



  • Level 1 Member
  • *
  • Posts: 24
Re: DCS-825L not work
« Reply #1 on: July 04, 2015, 03:50:59 PM »

hi sergio

Reset Button Press and hold the recessed button for a minimum of six seconds to reset the camera to the
factory default settings.

if its not working send your camera back.