The Graveyard - Products No Longer Supported > DNS-320
[SOLVED] - Help me to unbrick my DNS 320 A1
enoch81:
Hello guys,
I have a DNS 320 rev A1 that worked like a charm for several years with an unofficial firmware (ALT-F).
Two weeks ago I decided to upgrade that firmware, but things gone wrong
So i soldered the jtag connectors and successfully logged in with tera term.
But, how I can break the autoboot sequence and go to the u-boot command prompt?
I tried several schemas, press "space" on start.
Press space +1 on start
PRess space +1 several times on boot
PRess space +1 only once before the request "PRESS ANY KEY TO STOP AUTOBOOT".
What can I do?
ivan:
Have you tried asking on the Alt-F forum https://groups.google.com/forum/?hl=en#!forum/alt-f ?
enoch81:
--- Quote from: ivan on August 12, 2016, 10:06:30 AM ---Have you tried asking on the Alt-F forum https://groups.google.com/forum/?hl=en#!forum/alt-f ?
--- End quote ---
Already tryied, but it seems that it's a desert group.
Actually I solved to login to the u-boot shell due to bad solders.
I want to boot the kernel from the a usb pendrive so I can flash it from the webgui.
How can I do that?
I never used u-boot
this is what I tryied:
--- Code: ---Marvell_DNS320>> usb start
(Re)start USB...
USB: scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Marvell_DNS320>> usb storage
Device 0: Vendor: CBM Prod.: Flash Disk Rev: 5.00
Type: Removable Hard Disk
Capacity: 1998.0 MB = 1.9 GB (4091904 x 512)
Marvell_DNS320>> fatls usb 0:1
...
system volume information/
27810631 dns-320_a1_fw_v2.00
1 file(s), 1 dir(s)
Marvell_DNS320>> fatload usb 0:1 0x1000000 dns-320_a1_fw_v2.00
reading dns-320_a1_fw_v2.00
...
...
..
27810631 bytes read
Marvell_DNS320>>
--- End code ---
But how can I boot the kernel off the usb drive?
FurryNutz:
Any status on this? ???
enoch81:
--- Quote from: FurryNutz on August 26, 2016, 07:15:34 AM ---Any status on this? ???
--- End quote ---
Hi!
Actually I can boot into the alt-f webpage but it' has a weird behaviour, plus I can't reach the proper firmware upload page (I WANT TO RESTORE TO THE ORIGINAL FIRMWARE).
It' prompt me a "Unsupported unknown board" message.
I'm very tired, but I hate to throw away a functional NAS when it's only a matter of software.
In the alt-f group forum I had no answer.
The same on the http://forum.dsmg600.info
It's a nightmare.
The nas only boot up, show me a limited ALT-F interface but for some minutes, plus the fan it's completely ignored and it's turned off.
If someone can save my nas... please, help me.
Navigation
[0] Message Index
[#] Next page
Go to full version