The Graveyard - Products No Longer Supported > DIR-895L
dir-895l dropping wifi - rebooting by itself - stupid connect
mrjouroo:
isn't this router supposed to be the top model from dlink
i have reseted it , update to last firmware 1.13 but no hope
also what wrong with this firmware everything is very basic and my old cheap router have more customization
the qos feature is the worst i have ever seen. i have 50/10 connection and when i put my ps4
on high priority and i check speed on other devices they only get 10/10 !!!? really
my old 30$ router let me assign bandwidth for devices and this 400$ router only allows me to use a stupid drag and drop menu !!!!? really
FurryNutz:
Link>Welcome!
* What region are you located?
* Has a Factory Reset been performed?
* Was a Factory Reset performed before and after any firmware updates then set up from scratch? Link> >FW Update Process
* Was the router working before any firmware updates?
Internet Service Provider and Modem Configurations
* What ISP Service do you have? Cable or DSL?
* What ISP Modem Mfr. and model # do you have?
Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
* Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
* What wireless modes are you using?
* What wireless devices do you have connected?
* Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
* Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?
* For routers with Smart Connect Technology , try disabling this feature and test. Under Wireless.
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
http://www.foxnews.com/tech/2015/10/27/how-to-get-stronger-wi-fi-signal.html?icid=maing-grid7|main5|dl31|sec1_lnk3%26pLid%3D1839803170
http://www.smallnetbuilder.com/wireless/wireless-features/32896-will-a-new-ac-router-bring-you-wifi-joy
mrjouroo:
What region are you located? MEA
Has a Factory Reset been performed? YES
Was a Factory Reset performed before and after any firmware updates then set up from scratch?YES
Was the router working before any firmware updates? i called the d'link support and they told me i must update it to ver 1.13 because my connection use vlan id and ver 1.12 don't support it.
What ISP Service do you have? Cable or DSL? dsl
What ISP Modem Mfr. and model # do you have? i don't know it's from my isp and it doesn't have any information on it
i'm having new problem with it.
i can't log in to the router .first it only allows me to connect to 192.168.0.1 only once and if i refresh the page it shows me error message
" can't reach the page" and i have to turn it off and on
also after connecting to the page i can only pass the (user / password ) after that if i tried to go to other settings ( wireless , network , management .....)
it lag and show this message " router not found " then another message " page not found " :) :) :) :)
FurryNutz:
Did you follow this to update the FW? Link> >FW Update Process
If not I recommend you read that link and follow it and reload v1.13 FW using IE11 or FF. Clear the browser cache before and after loading the FW file. Exit the browser then try to access the router at 192.168.0.1...Be LAN cable wired to the router with the PC.
Use IE11 or FF or Opera to configure the router.
Please try to get the modem information if possible. Can post a picture of it if you can:
Adding Screenshots In A Post
mrjouroo:
i used emergency flash and flashed the firmware 1.13 and it worked
know the router works fine for 2-3 hours the the speed drop and become very slow on the 2.4gh until i restart it. most of the devices on it
about the modem it just white box with my isp logo on it and my isp use their custom firmware on it
Navigation
[0] Message Index
[#] Next page
Go to full version