• November 20, 2017, 09:21:45 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Does the DGS-1016D Switch support port trunking with the Qnap TS-453A  (Read 848 times)

SpectrumX

  • Level 1 Member
  • *
  • Posts: 1

Hi there,

I am looking to install a NAS for a small video editing company. We are hoping to buy the Qnap TS-453A https://www.qnap.com/en/product/model.php?II=212 and use the D-Link DGS-1016D 16-Port Gigabit Unmanaged Desktop/Rackmount Switch for connecting all the workstations.

I need to know if the DGS-1016D switch supports port trunking with our specific Qnap nas, I found a guide here: https://www.qnap.com/en/tutorial/con_show.php?op=showone&cid=216 and it states that the switch must support IEEE 802.3ad with LACP mode properly configured. I believe it does support IEEE 802.3ad, but what does it mean that LACP mode must be properly configured?

As you can see I am some what inexperienced with this stuff, if I could just get confirmation that the units are compatible, that port trunking will work and what it means that LACP needs to be properly configured.

Thanks,
Justin
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43644
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Does the DGS-1016D Switch support port trunking with the Qnap TS-453A
« Reply #1 on: February 25, 2017, 03:52:42 PM »

From the specs: http://us.dlink.com/products/business-solutions/16-port-copper-gigabit-switch/
Technical Specifications
General
Number of Ports
• DGS-1016D:  Sixteen 10/100/1000 Gigabit ports
• DGS-1024D:  Twenty-four 10/100/1000 Gigabit ports
Standards
• IEEE 802.3 10BASE-T Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• ANSI/IEEE 802.3 NWay auto-negotiation
• IEEE 802.3x Flow Control

This is a "unmanagaged" switch so I presume this model doesn't have any sort of UI to do any management on the unit. Just plug and play and everything else is automatic.

You might phone contact D-Link support on the phone and ask them what "managed" switch models they have that would work for your specific product needs.
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting