The Graveyard - Products No Longer Supported > DCS-2330L
Events are not clear to me
kladda:
Hi!
Just got a 2330L and this is what i would like to happen:
1. During monday-friday between 09:00-16:30 i would like the camera to notice motion and if motion occurs i would like it to:
A: Send some images via email
B: Record video to SD
--and--
2. 1. During monday-sunday between 00:00-06:00 i would like the camera to notice motion and if motion occurs i would like it to:
A: Send some images via email
B: Record video to SD
Is this possible? I can't seem to add two actions (send images and record video) to the same Event, therefor i can't the different schemes.
Is there a way to make a more complex event so the two-event-limit wont be a problem?
Thank you!
cmontyburns:
--- Quote from: kladda on January 05, 2017, 04:30:40 AM ---Is this possible? I can't seem to add two actions (send images and record video) to the same Event, therefor i can't the different schemes.
Is there a way to make a more complex event so the two-event-limit wont be a problem?
--- End quote ---
No, unfortunately. You're correct that you can't do what you want: each event can have only one action associated. You're further limited in that you can only have two events. So you might be able to get a partial solution one of two ways under those limitations:
1. Have one event for Mon-Fri and one event for Mon-Sun, and pick whether you prefer SD recording or emails for each.
OR
2. Find a blend of day range and time range that works for all seven days you want to cover. Set up one event for that range and pick whether you most prefer emails or SD card recording. Set that event to have the highest priority, and also set the motion detection delay (before triggering next event) to whatever the lowest value is (I think it might be one second). Then set up a second event for the same day/time range and have it do whichever of email and SD recording you did not pick in the first event. Make it second priority. The point of this approach is to have two events that fire almost simultaneously, with one handling email and one handling recording.
I'm skeptical how well #2 would work since these cameras have very weak processors and aren't good at doing more than one thing at once (if that sometimes!). But it might be worth a test.
FurryNutz:
Any status on this?
--- Quote from: kladda on January 05, 2017, 04:30:40 AM ---Hi!
Just got a 2330L and this is what i would like to happen:
1. During monday-friday between 09:00-16:30 i would like the camera to notice motion and if motion occurs i would like it to:
A: Send some images via email
B: Record video to SD
--and--
2. 1. During monday-sunday between 00:00-06:00 i would like the camera to notice motion and if motion occurs i would like it to:
A: Send some images via email
B: Record video to SD
Is this possible? I can't seem to add two actions (send images and record video) to the same Event, therefor i can't the different schemes.
Is there a way to make a more complex event so the two-event-limit wont be a problem?
Thank you!
--- End quote ---
KHALIL86:
Hello,
My Dlink send an email, but no video or images are sent in atachement.
I have configured the ftp server successfully.
any one can help me how to send image in attachment ?
Thank you.
FurryNutz:
Link>Welcome!
* What Hardware version is your DCS? Look at the sticker behind or under the camera.
* Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
* What region are you located?
What Mfr and model is the main host router?
What wireless modes are you using?
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.10 and .11 DHCP
Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com
Has this been working before or is this all new?
--- Quote from: KHALIL86 on August 05, 2017, 04:30:10 PM ---Hello,
My Dlink send an email, but no video or images are sent in atachement.
I have configured the ftp server successfully.
any one can help me how to send image in attachment ?
Thank you.
--- End quote ---
Navigation
[0] Message Index
[#] Next page
Go to full version