• November 19, 2017, 12:51:17 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 300Mbps Connection Requirements! Please Read!  (Read 11831 times)

Lycan

  • Administrator
  • Level 15 Member
  • *
  • Posts: 5335
300Mbps Connection Requirements! Please Read!
« on: November 07, 2007, 09:38:50 AM »

To have your Draft N wireless network connect at 300Mbps as it should, ensure that the following requirements are met.

1) The router and adapter are both D-Link 802.11N products and are using the latest firmeware/drivers. Ensure that the 802.11 Mode of the router has a 802.11N mode selected. Also if you have issues with mixed mode, try locking the 802.11Mode to either 802.11N Only or 802.11G/N.

2) If you are using encryption the router must be configured to use AES cipher. In some firmware versions/models, the only way to get the AES cipher is to run WPA2. If you can not select the Cipher, selecting WPA2 only will force this cipher type.

3) The channel width needs to be set to 20/40Auto, if it is not, the adapter will report a connection speed of 130Mbps. This is a feature that was added for compatibility with Intel 802.11N adapters, as they only operate on a channel width of 20. 

D-Link reccomends that you use the D-Link Wireless utility, however the Windows Zero Config will also work.

Assuming you have met all of these conditions, you should see a 300Mbps connection speed with either the D-Link Utility or WZC.

Note: Not all Intel adapters are the same as D-Link's N line. Some Intel adapters do not support the broader 40 Channel Width option. This (by design) limits their connection speed to 130. Check the specifications of your Intel adapter to ensure that it is capable of bonding on the 40Mhz range to achieve the full 300Mbps.

-Ru-Fi-Oh
« Last Edit: December 30, 2008, 09:12:16 AM by Ru-Fi-Oh »
Logged