D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-932L => Topic started by: JavaLawyer on April 23, 2014, 04:56:36 AM

Title: DCS-932L RevA - Firmware v1.09b01 - Comments & Observations
Post by: JavaLawyer on April 23, 2014, 04:56:36 AM
ftp://D-Link posted DCS-932L firmware version 1.09b01, which can be downloaded here: DCS-932L  - Firmware v1.09b01 Download (http://d2okd4tdjucp2n.cloudfront.net/DCS-932L_fw_v109_b1.zip).

Please post your comments and observations as a reply to this thread.

 :)  ;)  :)
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: JavaLawyer on April 23, 2014, 04:57:24 AM
D-Link has not yet published release notes for this latest firmware version.
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: ReverendTed on April 23, 2014, 07:36:03 AM
Looking forward to the release notes when they're available.  Got my fingers crossed that you'll be able to cross some items off the wishlist!
(Come on, Day\Night sensitivity tweaks!)
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: JavaLawyer on April 23, 2014, 07:42:38 AM
Quote from: ReverendTed on April 23, 2014, 07:36:03 AM
Looking forward to the release notes when they're available.  Got my fingers crossed that you'll be able to cross some items off the wishlist!
(Come on, Day\Night sensitivity tweaks!)

A firmware upgrade was also announced for the DCS-930L as well, and there are release notes (more like release "note") for that network camera model. From the timing, I have a sneaking suspicion that these two firmware upgrades may have the same fix.  ???  :-\  ???

Until a full change log is published for both the DCS-932L and DCS-930L, we won't know for sure exactly what was added.
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: JavaLawyer on April 23, 2014, 06:26:06 PM
Firmware: 1.09b01 - 04/22/2014


DCS-932L - Cumulative Firmware Release Notes (http://forums.dlink.com/index.php?topic=42617.0)
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: ReverendTed on April 23, 2014, 06:41:45 PM
Yup.  Well, maybe next time.
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: JavaLawyer on April 23, 2014, 07:11:18 PM
Quote from: ReverendTed on April 23, 2014, 06:41:45 PM
Yup.  Well, maybe next time.

Hopefully there's more to it than just this. The source I got the release notes from doesn't always capture everything that's new. We'll have to wait for the full change log.  :-\
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: MJamo on May 05, 2014, 07:04:35 PM
Hi
Updated FW at the weekend. It removed it from My Devices, so had to set it up from scratch.

I have also lost Push Notifications - anyone else?

thanks
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: JavaLawyer on May 19, 2014, 09:49:23 AM
Quote from: MJamo on May 05, 2014, 07:04:35 PM
Hi
Updated FW at the weekend. It removed it from My Devices, so had to set it up from scratch.

I have also lost Push Notifications - anyone else?

thanks

Is this still an issue for you?
Title: Re: DCS-932L - Firmware v1.09b01 - Comments & Observations
Post by: acellier on June 29, 2014, 05:03:46 PM
We finally bit the bullet and upgraded the firmware to 1.09, wired, from local desktop
The counter ran past 140 seconds and was not obviously going to ever stop, so we pulled power from the camera and rebooted it - and the firmware had installed OK (apparently).
Mydlink.com fails to let us access the camera, though it is in the list.

UPDATE - when we replaced the camera in its' position of use, it no longer communicated - turns out that the firmware update had wiped out the Network setup parameters such as static ip and port number - and reverted the password to blank ...

Don't trust these devices with life-hazard missions ...
Title: Re: DCS-932L RevA - Firmware v1.09b01 - Comments & Observations
Post by: 42ner on January 29, 2015, 08:32:16 PM
Folks, just pretty new here... But have been using DCS 932L for i think 2 years already...

My version is A. I upgraded the Firmware to 1.09. Now whenever I use the automatic day/night schedule so the camera will switch automatically to night when it reaches its day schedule, the camera keeps on restarting every 2 minutes. Now to prevent this I have switched the camera to just Day mode always to prevent this...

Anybody from you guys experiencing the same thing? how do I resolve this?

Thanks in Advance Folks...
Title: Re: DCS-932L RevA - Firmware v1.09b01 - Comments & Observations
Post by: JavaLawyer on February 06, 2015, 12:42:55 PM
D-Link posted DCS-932L RevA firmware version 1.10b03. Download this latest firmware and post your comments and observation on the following thread: DCS-932L RevA - Firmware v1.10b03 - Comments & Observations (http://forums.dlink.com/index.php?topic=61873.0)