D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-2630L => Topic started by: FurryNutz on November 09, 2016, 01:37:15 PM
-
D-Link posted DCS-2630L Rev A firmware version v1.04 Build 00, which can be downloaded here: DCS-2630L - Firmware v1.04.00 Download (https://www.mydlink.com/download).
Select DCS-2630L.
Problems Fixed
None
New Features
1. Upgrade mydlink agent to v2.1.0-b07 (Support Mydlink UID mechanism)
2. Updated OpenSSL to v1.0.2h
3. Show HW version in Web GUI(Device Info page) and NIPCA cgi (info.cgi)
NOTE: Be sure that your wireless signal on the main host router is good and signal is strong with the camera if it's connected wirelessly before upgrading FW.
- DCS-2630L Rev A - Firmware Release Notes (https://www.mydlink.com/download)
- Network Cameras - Important Posts & Information (http://forums.dlink.com/index.php?topic=58121.0)
- Network Cameras - Beta Firmware Terms and Conditions (http://forums.dlink.com/index.php?topic=47672.0)
- Network Cameras - Why Have Multiple Hardware Versions for the Same Model? (http://forums.dlink.com/index.php?topic=57627.0)
Please post your comments and observations as a reply to this thread.
:) ;) :)
-
Installed over the air without any problems.
-
Good to hear. ;)
-
Tried to install, but FW upgrade process stuck at 99% for quite a while now ... (two different camera's do have the same problem)
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?
Tried to install, but FW upgrade process stuck at 99% for quite a while now ... (two different camera's do have the same problem)
-
Been running 1.04 on my two 2630L cams now for a couple of weeks. Smooth install and no subsequent problems.
-
Good to hear.
Enjoy. ;)
-
i am on my second 2630l and the same low frame rate is on this one as well no matter how i set the audio and video . my 936 is awsome constatly getting 25 to 35 frames on a remote view and the response time on viewing the video is faster on the 936 then the 2630l . need a solution i reverted back to 1.03 firmware to see if this helps
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?
How many other wireless devices do you have connected to the main host router?
Let us know if using v1.03 FW works better...
i am on my second 2630l and the same low frame rate is on this one as well no matter how i set the audio and video . my 936 is awsome constatly getting 25 to 35 frames on a remote view and the response time on viewing the video is faster on the 936 then the 2630l . need a solution i reverted back to 1.03 firmware to see if this helps
-
Can we please have the date and hour folders in the FTP upload feature for images and video as optional please.
I can't get this camera to upload to the Zipato FTP server because the FTP server doesn't allow creating folders. It only allows to upload files.
-
Maybe try a different FTP server?
Might check with the Mfr of your current FTP server to see if there is any help on this with there server SW.
Can we please have the date and hour folders in the FTP upload feature for images and video as optional please.
I can't get this camera to upload to the Zipato FTP server because the FTP server doesn't allow creating folders. It only allows to upload files.
-
Camera users with Wireless N mode routers and beyond, ensure that WMM is enabled on your routers. This helps in wireless and camera operation. Should be always enabled, unless your troubleshooting problems.