The hardware is:
Device Type:
WiFi Router
Brand:
D-Link
Model:
DIR-600
Version:
B5E
Availability:
Discontinued
Supported Since Rel:
14.07
Supported Current Rel:
15.05.1
Platform:
Ralink RT5350
Target:
ramips
Instruction Set:
MIPS32
Sub Instruction Set:
MIPS32 24K/E series
Bootloader:
U-Boot
CPU MHz:
360
Flash MB:
4
RAM MB:
32
Ethernet 100M ports:
5
Ethernet GBit ports:
-
Switch:
Ralink RT5350
Modem:
No
VLAN:
Yes
WLAN Hardware:
Ralink RT5350
WLAN 2.4GHz:
b/g/n
WLAN 5.0GHz:
-
Detachable Antennas:
1
USB ports:
-
Serial:
Yes
JTAG:
¿
LED count:
7
Button count:
2
Power Supply:
5 VDC, 1.0 A
Device Page:
dir-300revb
WikiDevi URL:
https://wikidevi.com/wiki/D-Link_DIR-600_rev_B5
OEM Device Homepage URL:
http://www.dlink.com/de/de/support/product/dir-600-wireless-n-150-home-router
Firmware OEM Stock URL:
http://www.dlink.com/de/de/support/product/dir-600-wireless-n-150-home-router
Firmware OpenWrt Install URL:
https://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/rt305x/openwrt-15.05.1-ramips-rt305x-dir-610-a1-squashfs-factory.bin
Firmware OpenWrt Upgrade URL:
https://downloads.openwrt.org/chaos_calmer/15.05.1/ramips/rt305x/openwrt-15.05.1-ramips-rt305x-dir-610-a1-squashfs-sysupgrade.bin
Comments:
Works with DIR-610A1 image; u-boot version in original firmware prevents direct flashing openwrt
I`ve trying to follow the guide from
http://diy.viktak.com/2016/02/installing-openwrt-on-d-link-dir-600.html with a hope that i get Telnet to connect to the router, with a hope to install OpenWrt firmware. After uploading the image:
dir600b_v2.17_bbox-v1.19.1.bin - a modified version of the original firmware that includes a telnet daemon so that remote connection is possible to the router
the router Power Led is Green and flashing at a rate of ~1/s. If i try to connect to default IP of the router 192.168.0.1 it does not display any page, I`ve tried Firefox and IE from Windows 10, I also tried to do port scanning on that default ip of the router, it does not discover anything, i`ve tried different tools netscan, portQry, etc. I also tried to scan for IP in the range 192.168.0.0 to 192.168.0.255 and it discover I get the network card of the mobo, that has an static ipv4 already set to 192.168.0.2 by me. I `ve read pretty much anything that could be read on Internet regarding to DIR 600 and firmware update, I`ve tried to get the page where I can upload the image aka " D-Link Router Recovery Mode Page" on the same default IP of router but it does not show up.
So the green light it begin flashing as soon as plug the power, also the wireless led does not let up and the 1,2,3,4 boxes do lit up depending in what slot I plug the cable. Any hints & love here ?
Some useful links:
http://forums.dlink.com/index.php?topic=44909.0
https://wiki.openwrt.org/toh/d-link/dir-300revb
https://wiki.openwrt.org/toh/hwdata/d-link/d-link_dir-600_b5e