• April 16, 2024, 12:59:20 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: EBR-2310 connection issues II  (Read 21233 times)

seanml

  • Level 1 Member
  • *
  • Posts: 9
EBR-2310 connection issues II
« on: January 28, 2017, 09:43:05 PM »

I have been getting similar issues with the same router. RCA/Thomson/Technicolor   TC4300
Cant seem to even go on there site. That is now the second problem other than constant disconnections.  Some pages work.

ISP is teksavvy modem just has one port it is
Firmware is update 2.01 Hardware Version: B1


"[INFO] Sat Jan 28 02:42:07 2017 Log viewed by IP address 192.168.0.101
[INFO] Sat Jan 28 02:41:59 2017 Blocked incoming TCP connection request from 192.81.135.222:47471 to 108.162.129.80:443
[INFO] Sat Jan 28 02:41:55 2017 Allowed configuration authentication by IP address 192.168.0.101
[INFO] Sat Jan 28 02:41:45 2017 Blocked incoming TCP connection request from 179.26.149.129:50032 to 108.162.129.80:23
[INFO] Sat Jan 28 02:40:55 2017 Blocked incoming TCP connection request from 116.96.196.116:16468 to 108.162.129.80:23
[INFO] Sat Jan 28 02:40:53 2017 Blocked incoming TCP connection request from 113.91.136.129:15951 to 108.162.129.80:22
[INFO] Sat Jan 28 02:40:41 2017 Blocked incoming TCP connection request from 125.127.137.6:58920 to 108.162.129.80:22
[INFO] Sat Jan 28 02:40:15 2017 Blocked incoming TCP connection request from 14.148.145.194:30077 to 108.162.129.80:23
[INFO] Sat Jan 28 02:40:12 2017 Blocked incoming TCP connection request from 115.233.217.117:24465 to 108.162.129.80:23
[INFO] Sat Jan 28 02:40:11 2017 Blocked incoming TCP packet from 172.217.17.65:80 to 108.162.129.80:51379 as SYN:ACK received but there is no active connection
[INFO] Sat Jan 28 02:39:15 2017 Blocked incoming TCP connection request from 178.220.112.121:27709 to 108.162.129.80:5358
[INFO] Sat Jan 28 02:39:13 2017 Blocked incoming TCP connection request from 94.183.131.58:3330 to 108.162.129.80:23
[INFO] Sat Jan 28 02:36:16 2017 Dropped packet from 192.168.0.101 to 206.248.154.170 (IP protocol 17) as unable to create new session
[INFO] Sat Jan 28 02:36:16 2017 Dropped packet from 192.168.0.101 to 23.34.211.66 (IP protocol 6) as unable to create new session
[INFO] Sat Jan 28 02:36:15 2017 Blocked incoming TCP connection request from 118.70.11.25:58962 to 108.162.129.80:2323
[INFO] Sat Jan 28 02:34:59 2017 Dropped packet from 192.168.0.101 to 104.208.165.109 (IP protocol 6) as unable to create new session
[INFO] Sat Jan 28 02:34:59 2017 Previous message repeated 1 time
[INFO] Sat Jan 28 02:34:57 2017 Dropped packet from 192.168.0.101 to 205.217.167.18 (IP protocol 6) as unable to create new session
[INFO] Sat Jan 28 02:34:57 2017 Blocked incoming TCP connection request from 95.0.123.67:52751 to 108.162.129.80:23
[INFO] Sat Jan 28 02:34:34 2017 Blocked incoming TCP packet from 172.217.17.65:80 to 108.162.129.80:54113 as SYN:ACK received but there is no active connection
[INFO] Sat Jan 28 02:34:11 2017 Blocked incoming ICMP error message (ICMP type 3) from 71.50.85.31 to 108.162.129.80 as there is no UDP session active between 108.162.129.80:22678 and 71.50.85.31:53
[INFO] Sat Jan 28 02:34:07 2017 Blocked incoming TCP connection request from 82.193.113.82:17292 to 108.162.129.80:23
[INFO] Sat Jan 28 02:33:18 2017 Dropped packet from 192.168.0.101 to 81.161.59.85 (IP protocol 6) as unable to create new session
[INFO] Sat Jan 28 02:33:16 2017 Blocked incoming TCP connection request from 183.60.48.25:12213 to 108.162.129.80:9527
[INFO] Sat Jan 28 02:32:48 2017 Blocked incoming TCP connection request from 211.209.68.74:20481 to 108.162.129.80:23
[INFO] Sat Jan 28 02:32:42 2017 Blocked incoming TCP connection request from 220.133.177.66:26107 to 108.162.129.80:23
[INFO] Sat Jan 28 02:31:48 2017 Dropped packet from 192.168.0.101 to 54.68.115.19 (IP protocol 6) as unable to create new session
[INFO] Sat Jan 28 02:31:47 2017 Previous message repeated 1 time
[INFO] Sat Jan 28 02:30:49 2017 Dropped packet from 192.168.0.101 to 23.34.218.22 (IP protocol 6) as unable to create new session
[INFO] Sat Jan 28 02:30:49 2017 Dropped packet from 192.168.0.101 to 172.217.0.161 (IP protocol 6) as unable to create new session
[INFO] Sat Jan 28 02:30:49 2017 Previous message repeated 2 times

Is the newest errors. I tried most of your ideas at the start of the page. I just cant test the router at a second location. Maybe we can start from the beginning and walk me through everything
« Last Edit: January 28, 2017, 09:45:52 PM by seanml »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: EBR-2310 connection issues II
« Reply #1 on: January 29, 2017, 11:40:27 AM »



  • What region are you located?


Internet Service Provider and Modem Configurations
  • What ISP Modem service link speeds UP and Down do you have? Link> Speed Testing Sites
  • By-pass the main host router and check internet connection by connecting a wired LAN PC directly to the ISP modem to verify connection access and ISP speeds.
  • Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.
  • Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
  • For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
  • If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT and How NAT Works. Call the ISP and ask to see if the ISP modem can be bridged. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
    Example of a D-Link router configured for PPPoE with ISP Modem bridged: PPPoE Configuration on a Router
« Last Edit: January 29, 2017, 05:39:39 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

seanml

  • Level 1 Member
  • *
  • Posts: 9
Re: EBR-2310 connection issues II
« Reply #2 on: January 29, 2017, 01:17:26 PM »

Router: D-Link EBR-2310 Ethernet Broadband Router
Router version: B1
What region are you located? Ottawa, Ontario
[/u]
What ISP Modem service link speeds do you have: UP 1.08 mbps and Down 15.9mbps
By-pass the main host router and check internet connection by connecting a wired LAN PC directly to the ISP modem to verify connection access and ISP speeds.: Works perfect
Check cable between Modem and Router:Secured connection
If the ISP modem has a built in router, it's best to bridge the modem: Modem is a single port modem with no wifi/router capabilities (RCA/Thomson/Technicolor   TC4300) is modem
« Last Edit: January 29, 2017, 01:27:43 PM by seanml »
Logged

seanml

  • Level 1 Member
  • *
  • Posts: 9
Re: EBR-2310 connection issues II
« Reply #3 on: January 31, 2017, 10:59:52 AM »

where are the mtu settings for D-Link EBR-2310 Ethernet Broadband Router?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: EBR-2310 connection issues II
« Reply #4 on: January 31, 2017, 11:17:27 AM »

Maybe under Setup/Internet?


Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

seanml

  • Level 1 Member
  • *
  • Posts: 9
Re: EBR-2310 connection issues II
« Reply #5 on: February 04, 2017, 01:35:30 PM »

naw not in there, would it be labelled MTU?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: EBR-2310 connection issues II
« Reply #6 on: February 04, 2017, 01:47:55 PM »

Most MTU features are kept under Internet manual settings sections in D-Link FW.

You don't see any MTU features anywhere in the UI?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

seanml

  • Level 1 Member
  • *
  • Posts: 9
Re: EBR-2310 connection issues II
« Reply #7 on: February 04, 2017, 01:55:00 PM »

Cool found it, was alreayd at the proper setting. Should I use dynamic or static IP?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: EBR-2310 connection issues II
« Reply #8 on: February 04, 2017, 03:31:35 PM »

Where was it?

Dynamic for WAN IP? Depend on your ISP if your asking about this. Most use Dynamic unless you pay for a static IP address.
For LAN side devices, you can set static on those devices that don't need much internet access. Printer, NAS, cameras phones and controllers.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

seanml

  • Level 1 Member
  • *
  • Posts: 9
Re: EBR-2310 connection issues II
« Reply #9 on: February 04, 2017, 09:30:36 PM »

alright, hmm not sure why the connection keeps bouncing on and off. Still cant find the issue in my control panel. I know it is stable when the router isn't connected
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: EBR-2310 connection issues II
« Reply #10 on: February 05, 2017, 12:50:30 PM »

Swap LAN cable between modem and router?
Is DNS relay enabled or disabled, try both?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

seanml

  • Level 1 Member
  • *
  • Posts: 9
Re: EBR-2310 connection issues II
« Reply #11 on: February 06, 2017, 07:19:34 PM »

found it, still me and the second pc keep going on and off with packet protocol 17 fails now
« Last Edit: February 06, 2017, 08:19:04 PM by seanml »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: EBR-2310 connection issues II
« Reply #12 on: February 07, 2017, 06:09:49 AM »

What Windows version are you using?
Is DNS relay enabled or disabled, try both?
What is the Mfr and model of the NIC adapter installed in this PC?
Did you set up an IP address reservation for the PC?
Do other devices exhibit that same issue as this one PC?
« Last Edit: February 07, 2017, 06:14:03 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

seanml

  • Level 1 Member
  • *
  • Posts: 9
Re: EBR-2310 connection issues II
« Reply #13 on: February 07, 2017, 08:10:38 AM »

What Windows version are you using?
Windows 7 ultimate

Is DNS relay enabled or disabled, try both?
enabled

What is the Mfr and model of the NIC adapter installed in this PC?
Qualcomm Atheros Killer e2200 Gigabit Ethernet Controller (NDIS 6.30)
Do I need to open computer to find model number?

Did you set up an IP address reservation for the PC?
Where do I do that?

Do other devices exhibit that same issue as this one PC?
Yes the laptop. When only the computer is hooked up to the router it works perfectly, but as soon as the laptop is hooked up they both have issues.
« Last Edit: February 07, 2017, 08:20:04 AM by seanml »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: EBR-2310 connection issues II
« Reply #14 on: February 07, 2017, 08:24:47 AM »

Does the LT (laptop) work by itself with out the PC connected?

What is the Mfr and model of the NIC on the LT?

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: [1] 2