Topic: Repeater DIR-505 throughput fluctuation (Read 9276 times)

guilherme.nack · « **on:** November 18, 2016, 03:55:57 AM »

Hi,

I have bought a D-Link repeater DIR-505 and have tested its throughput using iPerf.

The throughput of this repeater is very good, but when configuring the WAN in the Ethernet port, the throughput drops to "0" each period of around 10 seconds. As shown on image below

For curiosity, when configuring the WAN of the repeater as wireless signal I did not get this problem.

Is my router with problems or it is common?

Thank you.

Att,
Guilherme

FurryNutz · « **Reply #1 on:** November 21, 2016, 07:02:17 AM »

Link>Welcome!

What Hardware version is your router? Look at sticker under the router case.
Link>What Firmware version is currently loaded? Found on the routers web page under status.
What region are you located?

D-Link Forums

News:

Author Topic: Repeater DIR-505 throughput fluctuation (Read 9276 times)

guilherme.nack

Repeater DIR-505 throughput fluctuation

FurryNutz

Re: Repeater DIR-505 throughput fluctuation