D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-878 => Topic started by: BentRask on June 09, 2020, 11:02:36 AM

Title: Vlan 101
Post by: BentRask on June 09, 2020, 11:02:36 AM

Does the Dlink Dir 878 support Vlan 101 as my new internet provider use that?

Best Regards
BentRask

Title: Re: Vlan 101
Post by: FurryNutz on June 09, 2020, 11:06:10 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)

• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Review the user manual for VLAN information. I don't believe the 878 has VLAN support.

Title: Re: Vlan 101
Post by: BentRask on June 09, 2020, 11:38:29 AM

I have a fiber connection through Hiper in denmark. Firmvare version is 1,20

if Vlan 101 is supported, i don't need the xyxel router that Hiper has send me to use.

I think it is supported, as i saw this
https://global.dlink.com.sg/faq/faq_pdfs/DIR-878/How-to-configure-VLAN-on-DIR-878.pdf

Title: Re: Vlan 101
Post by: FurryNutz on June 09, 2020, 11:50:36 AM

Give that a try and see how it works for you. Let us know.

Title: Re: Vlan 101
Post by: ener_dk on June 25, 2020, 11:12:44 PM

Hi BentRask,

I have exactly the same connection as you and I have tried with the DIR-878.
It works but if I do a speed test with both iperf3 and Speedtest.net I can not get the speed higher than around 200-300 mbps on a cat6 cable connection.
But it I connect the ISP Zyxel router it easily gives me speeds from 800-1000 mbps.

I don't know if its something in the settings that I'm missing but currently I'm using the Zyxel VMG3925-B10B instead of the D-Link DIR-878.
I have set the vlan to 101.

BR
Ener_dk