The Graveyard - Products No Longer Supported > DCS-2670L

Watch-dog constantly rebooting the device

<< < (2/2)

FurryNutz:
 ;)

vince105:
Removing the SD card seemed to help recovery after watch-dog does its thing but it still goes off just as frequent. :-\ So I'm back at square one.

FurryNutz:
Ok, was curious about the SD card.

Hopefully D-Link Canada will be able to get you working again. Keep us posted.

covex:
I have the similiar issue, but I am not using SD card and my reboot code is 16:

21.   2019/02/17 17:13:41 Event trigger - motion detection.
22.   2019/02/17 17:12:38 network port connected.
23.   2019/02/17 17:12:12 system power on.
24.   2019/02/17 17:11:47 system watch-dog reboot.(code 16)
25.   2019/02/17 17:11:40 Event trigger - motion detection.
26.   2019/02/17 17:05:43 admin login Ok from fc00:aaaa:bbbb::78
27.   2019/02/17 17:05:36 network port connected.
28.   2019/02/17 17:05:10 system power on.
29.   2019/02/17 17:04:45 system watch-dog reboot.(code 16)
30.   2019/02/17 17:04:38 Event trigger - motion detection.
31.   2019/02/17 17:04:28 automat login Ok from 192.168.2.1
32.   2019/02/17 17:03:19 Event recover - motion detection.
33.   2019/02/17 17:03:16 Event trigger - motion detection.
34.   2019/02/17 16:57:16 Event recover - motion detection.
35.   2019/02/17 16:57:13 Event trigger - motion detection.
36.   2019/02/17 16:54:26 Event recover - motion detection.
37.   2019/02/17 16:54:23 Event trigger - motion detection.
38.   2019/02/17 16:53:03 network port connected.
39.   2019/02/17 16:52:37 system power on.
40.   2019/02/17 16:52:12 system watch-dog reboot.(code 16)

Navigation

[0] Message Index

[*] Previous page