• November 03, 2024, 11:33:42 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS Network Cameras - Why Did My Camera IP Address Change?  (Read 11797 times)

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
DCS Network Cameras - Why Did My Camera IP Address Change?
« on: August 15, 2012, 08:58:56 AM »

The IP address of a D-Link network camera connected to a network is subject to change if the router is configured to use dynamically assigned IP addressing. By reserving an IP address, the network camera can be permanently assigned the same IP address.

Hypothetical Scenario That Could Cause a Camera IP Address to Change:

  • Network camera joins the network
  • Router assigns the next free IP address: 192.168.1.2
  • Network camera briefly loses power and drops from the network
  • Router releases the IP address (since the camera is no longer using it)
  • Laptop joins the network
  • Router assigns the laptop the next free IP address: 192.168.1.2
  • Network camera re-joins the network
  • Router assigns the next free IP address: 192.168.1.3 (192.168.1.2 is no longer available)

Reserving an IP Address for a Network Camera

The router web interface offers an option to reserve a specific IP address for any device on the network. Once an IP address is reserved (i.e. assigned) to the network camera, the reserved IP address will always be assigned to the network camera, even if the camera drops off and rejoins the network.

Notes

The DCS network camera series provide an option to set a static IP address directly in the network camera web interface. Although this option is available, IP addresses should always be reserved from within the router web interface rather than the devices connected to the router. Setting a static IP address from within the network camera may result in an addressing conflict if two devices are requesting the same static IP address.

Additional Resources

« Last Edit: December 19, 2014, 04:53:09 AM by JavaLawyer »
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC