D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-859 => Topic started by: andrelhj on December 02, 2017, 06:17:50 AM
-
My DIR-859 is with the firmware corrupted and I am trying to install the firmware but already tried everything. The DIR-859 is with the power LED blinking and I can not get the firmware installed. I have already downloaded the original firmware, followed the instructions to upload the firmware but the firmware does not install. Someone has already experienced this problem?
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What Hardware version is your router? Look at sticker under the router case.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
- Are you wired or wireless connected to the router?
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
Follow this to upload FW and see if this helps:
Emergency Recovery Mode (http://forums.dlink.com/index.php?topic=44909.msg163599#msg163599)
Be sure to use IE11 browser or FF browser. Do not use Chrome!!!