D-Link Forums
The Graveyard - Products No Longer Supported => Access Points / Extenders => DWL-7700AP => Topic started by: teredactle on April 04, 2011, 10:53:23 AM
-
Sorry, this post if offtopic and in the wrong forum, but I cannot find an adequate forum, not one where I can actually POST this help request. Sorry mods, please feel free to move or create the right child category. anyway...
Can someone tell me how I can do a hardware reset on this AP (DWL-7700AP). We have a unit in our hardware demo room which was configured by a predecessor but there was no info transfer when he left. Now I can't reset this device to get into the configuration.
I went through all documents and internet search to no avail. This unit is out of warranty, so opening it up (if need be) is not an issue.
Thank you!
-
There a button in back?
You could try from the devices menu as showed here:
http://support.dlink.com/Emulators/dwlag700ap/html/MntRestartSystem.html (http://support.dlink.com/Emulators/dwlag700ap/html/MntRestartSystem.html)
-
This is the unit in question: http://www.dlink.ca/products/?pid=376
There is absolutely no button anywhere on this housing; this unit is meant to be installed outdoors. You would think Dlink would have provided something for a hard reset but there is nothing anywhere on it.
Apparently you have to send it in to get it reset; I'm looking for alternate solutions and will probably open this baby up soon enough to get to the guts and see if I can do it this way.
Thanks anyway though. :)
-
Can you get to the devices menu to reset it?
http://support.dlink.com/Emulators/dwlag700ap/html/MntRestartSystem.html (http://support.dlink.com/Emulators/dwlag700ap/html/MntRestartSystem.html)
-
Can you get to the devices menu to reset it?
http://support.dlink.com/Emulators/dwlag700ap/html/MntRestartSystem.html (http://support.dlink.com/Emulators/dwlag700ap/html/MntRestartSystem.html)
I can't get into the menu because I don't have the admin password, this is why I'm looking for a hardware reset button as it will reset it to a blank password. :(
-
OK, I would call DLink and ask...sorry could be of more help.
-
It's all good, I tried l/p combo user/password and it worked, I then was able to reset to factory settings and change the IP and set it up properly.
I don't know if this was done or it was the default, maybe it will help someone.
cheers!
-
Kewl man. Glad you found it. Now write it down LOL. ::)