• April 19, 2024, 08:50:51 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How do I set up my device using the D-Link Wi-Fi app?  (Read 5193 times)

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
How do I set up my device using the D-Link Wi-Fi app?
« on: November 20, 2020, 01:09:42 PM »
Download the D-Link Wi-Fi app on your mobile device from the Google Play store or Apple App Store and follow the on-screen instructions to set up your device.

Step 1: Launch the D-Link Wi-Fi app from your mobile device that is connected to your device’s network.

Step 2: To add a new device, tap Install New Device.

Step 3: Tap Scan the QR code to scan the QR code on your quick installation card or tap Continue without scanning to manually choose a model.

Step 4: To scan the QR code, please hold your mobile device steady for 2-3 seconds towards the QR code that you want to scan.  Skip the step if you manually selected your model from the list.

Step 5: Unplug your DSL or cable modem. Then tap Next.

Step 6: Plug one end of the Ethernet cable into Internet port on the router and the other end into your modem. Then, tap Next to continue.
 
Step 7: Power on the modem. Then tap Next.

Step 8: Power on your device. Then tap Next.

Step 9: After completing the booting process, tap Next.

Step 10: Wait while the D-Link Wi-Fi app is connecting to your device. 

Step 11: To set up your Wi-Fi network, enter your Wi-Fi Network name (SSID) and Wi-Fi password. Then tap Next to continue.

Step 12: To protect your device, please give your device a password. Then tap Next to continue.

Step 13: Select how you want to update device firmware. Then tap Next to continue.

Step 14: A summary page displays. Tap Save to continue.

Step 15: Wait while the changes are being saved.

Skip to Step 20 if not setting up a COVR device.

Step 16: Place the remaining Covr Points, if any, to the area where you think you will need Wi-Fi the most. Then tap Next to continue.
 
Step 17: Power on the Covr Points and wait until the LED starts blinking orange. Then tap Next to continue.

Step 18: Wait while synchronizing the Covr Points.

Step 19: Make sure that the Covr LED turns solid white. Then, tap Next to continue.

Step 20: To register for a D-Link account to enable the Goggle Assistant, Alexa or D-Link defend, tap Register, or tap Not Now to skip.

Step 21: Tap FINISH to complete the setup process.
Logged