• April 25, 2024, 12:43:39 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: [1.06] No sleep for the HDDs  (Read 15784 times)

icewater

  • Level 1 Member
  • *
  • Posts: 7
[1.06] No sleep for the HDDs
« on: January 20, 2009, 04:40:13 AM »
I've upgraded from 1.05 to 1.06.
It appears that my 2 x 1TB WD HDDs will not sleep now.
It is constantly on and spinning.
It makes the box rather warm to touch.

I downgraded back to 1.05 and everything is fine again. (it goes back to sleep over the pre-determined time)
I believe this problem might be mentioned in another forum.
However, I cannot find any solutions to it. (maybe it will be fixed in 1.07)

I do like the ps3 media streaming and ssl ftp (if anyone knows the port ranges to forward) functions in 1.06.

Has anyone also experienced this problem??
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: [1.06] No sleep for the HDDs
« Reply #1 on: January 21, 2009, 11:32:10 AM »
No. This seems to work great right now.
Logged
Never forget that only dead fish swim with the stream

icewater

  • Level 1 Member
  • *
  • Posts: 7
Re: [1.06] No sleep for the HDDs
« Reply #2 on: January 22, 2009, 01:38:56 AM »
Quote from: ECF on January 21, 2009, 11:32:10 AM
No. This seems to work great right now.

There are similar reports from other users having the same problem with 1.06.

http://forum.dsmg600.info/t3574-Constant-disk-access-with-Firmware-1.06.html
http://forum.dsmg600.info/t3689-Help!-Crazy-continuous-disk-activity!-1.06%2C-2xSamsung-JBOD.html
http://forum.dsmg600.info/t3672-Firmware-1.06-more-wait-mode-problems%3F.html
Logged

icewater

  • Level 1 Member
  • *
  • Posts: 7
Re: [1.06] No sleep for the HDDs
« Reply #3 on: January 22, 2009, 03:00:18 AM »
One more from this forum:

http://forums.dlink.com/index.php?topic=3772.0
Logged

superxoum

  • Level 1 Member
  • *
  • Posts: 16
Re: [1.06] No sleep for the HDDs
« Reply #4 on: January 23, 2009, 02:57:10 AM »
UP...

Also impacted by that....
Every 30s it seems there is some disk activity even with network cable unplugged

Raid 1 + Fw 1.06
Logged

Chill

  • Level 2 Member
  • **
  • Posts: 43
Re: [1.06] No sleep for the HDDs
« Reply #5 on: May 16, 2009, 07:56:31 AM »
Also suffering from this problem. I have searched for a solution and had led me to this site.

Any updates from the dlink support team?
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: [1.06] No sleep for the HDDs
« Reply #6 on: May 19, 2009, 01:33:09 PM »
Try resetting the unit to factory defaults if this has not been done since updating to 1.06. Are you using the iTunes server or UPnP AV media server function with any device currently?
Logged
Never forget that only dead fish swim with the stream

Chill

  • Level 2 Member
  • **
  • Posts: 43
Re: [1.06] No sleep for the HDDs
« Reply #7 on: May 19, 2009, 11:02:51 PM »
Quote from: ECF on May 19, 2009, 01:33:09 PM
Try resetting the unit to factory defaults if this has not been done since updating to 1.06. Are you using the iTunes server or UPnP AV media server function with any device currently?

OK will try this out. To answer some of your questions, yes iTunes is enabled and no, the UPnP AV media is disabled.

I use the iTunes to stream music to my Roku soundbridge which I use on a daily basis
Logged

kizer_rezik

  • Level 2 Member
  • **
  • Posts: 31
Re: [1.06] No sleep for the HDDs
« Reply #8 on: May 21, 2009, 04:05:21 PM »
I have everything turned off and reset my settings after I installed 1.06.

It simply does not work. Nothing shuts off and the fans seem to take forever to come on. I've personally mentioned it a few times and well still nothing. I was hoping that 1.07 would address it, but instead I"m stuck with 1.05 that does appear to work and the lack of raid rebuilding that 1.06 does offer.

Looking at 1.08 it appears that this problem is still not going to be addressed which is sad. I really want to get really loud and maybe get heard, but at this point I'm sure its not going to get addressed because since several of us have complained nothing has been done.
« Last Edit: May 21, 2009, 04:10:43 PM by kizer_rezik »
Logged

sadian

  • Level 1 Member
  • *
  • Posts: 3
Re: [1.06] No sleep for the HDDs
« Reply #9 on: May 22, 2009, 10:53:27 AM »
I have the same problem, too.

I disabled UPnP, iTunes, e-mail alerts, DHCP cient, almost everything. I have also done a reset to factory default settings but nothing changed. The problem is still there.

D-Link, please give a solution to this very frustrating problem.


Raid 1 + Fw 1.07



Logged

Chill

  • Level 2 Member
  • **
  • Posts: 43
Re: [1.06] No sleep for the HDDs
« Reply #10 on: May 25, 2009, 06:50:36 PM »
Quote from: ECF on May 19, 2009, 01:33:09 PM
Try resetting the unit to factory defaults if this has not been done since updating to 1.06. Are you using the iTunes server or UPnP AV media server function with any device currently?

I have tried your suggestion, but it did not work.

Here is what I've done so far:

took out the old drive (RHS)
inserted new drive
reinstalled 1.06 FW
reset to factory default
reformated the new drive
FTP, UPnP, iTunes, LLTD all are disabled
No files on the new drive (not even FFP, transmission etc.....)
Synced time to pool.ntp.org
configured power management to 10 minutes

the disk still spins well after 10 minutes
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: [1.06] No sleep for the HDDs
« Reply #11 on: May 28, 2009, 10:39:47 AM »
Do they spin down if all PCs are turned off?
Logged
Never forget that only dead fish swim with the stream

icewater

  • Level 1 Member
  • *
  • Posts: 7
Re: [1.06] No sleep for the HDDs
« Reply #12 on: May 28, 2009, 07:17:16 PM »
Quote from: ECF on May 28, 2009, 10:39:47 AM
Do they spin down if all PCs are turned off?

No, they don't in my case.
All PCs and WiFi turned off, but the HDDs do not spin down.

But after downgraded back to 1.05, they spin down as normal.
It appears to be firmware related.
Logged

Chill

  • Level 2 Member
  • **
  • Posts: 43
Re: [1.06] No sleep for the HDDs
« Reply #13 on: May 28, 2009, 09:03:40 PM »
Quote from: icewater on May 28, 2009, 07:17:16 PM
No, they don't in my case.
All PCs and WiFi turned off, but the HDDs do not spin down.

But after downgraded back to 1.05, they spin down as normal.
It appears to be firmware related.

Icewater,

what lights are lighted, dimmed, flickering after the prescribed time has elapsed on your power management?
Logged

sadian

  • Level 1 Member
  • *
  • Posts: 3
Re: [1.06] No sleep for the HDDs
« Reply #14 on: May 30, 2009, 12:49:48 AM »
Quote from: icewater on May 28, 2009, 07:17:16 PM
No, they don't in my case.
All PCs and WiFi turned off, but the HDDs do not spin down.

But after downgraded back to 1.05, they spin down as normal.
It appears to be firmware related.

In my test, I have unpluged the ethernet cable and after a few minutes of stand by the box woke up again.
Logged
Pages: [1] 2
« previous next »