• June 16, 2024, 02:39:35 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 825 G1 Hardware access point problem  (Read 3463 times)

nandao1234

  • Level 1 Member
  • *
  • Posts: 1
825 G1 Hardware access point problem
« on: June 04, 2020, 01:22:44 PM »

Hi guys. I am sorry but I am a bit upset with D-Link. I bought the DIR-825 G1 model here from Brazil. If you look at the local Product Page https://www.dlink.com.br/produto/roteador-wireless-gigabit-ac1200-dir-825/, this model is still active down here. Status do produto: Ativo translates into Product Status: Active. Almost no need to translate =). Newest firmware was released April 30 2019, v7.11. I came here and found out that the product is on the graveyard  :'(

Anyways, I am using it as an access point with my ISP's modem/router as the main device. Ethernet cable runs from a Gigabit LAN port of the modem to a Gigabit LAN port of the DIR-825, I've read the step-by-step of turning your router into an AP http://forums.dlink.com/index.php?topic=40856.0 and followed it.
The problem is that my connection to the internet, when running through dir-825, is really poor. The speed sometimes is nice, I can get the full 240Mbps, but the latency is really bad, sometimes getting 240ms (using a server that is 2 blocks from my house) at the speedtest.net test. Webpages in general takes forever to load. Some smart switches that I have close to the router keep going offline even though their status led is indicating that they are connected to wifi. Anyways, do you have a specific guide and/or advice for this model and revision?

Thanks in advance.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 825 G1 Hardware access point problem
« Reply #1 on: July 15, 2020, 10:02:30 AM »

Welcome!

This forum is a USA regional forum site. So if you see router models i the grave yard, its for the USA region. The Rev G1 model is not marketed here in the USA. Last Rev to be seen here in the USA was Rev B and C. That was many years ago.

Other regions for D-Link may market newer Revs of the 825.

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Good Luck.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.