• April 18, 2024, 08:29:37 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: VOIP does not work with DIR-601  (Read 8003 times)

ramuc

  • Level 1 Member
  • *
  • Posts: 2
VOIP does not work with DIR-601
« on: August 01, 2010, 08:07:16 AM »

I just installed my new DIR-601 and I'm unable to make phone calls with my VOIP device. The device worked just fine with my previous wireless routers. I verified that the VOIP device itself is not a problem by directly connecting to the DSL modem. So, it is certainly my D-Link router which is the culprit.

I tried disabling SIP ALG in firewall settings. I also tried disabling SPI. None of them helped. Anybody else with similar problems?

Thanks
Logged

swissco

  • Level 1 Member
  • *
  • Posts: 1
Re: VOIP does not work with DIR-601
« Reply #1 on: August 02, 2010, 04:02:08 PM »
I had the same problem and found the following link that resolved my problem - all I had to do is upgrade the DIR-601 firmware

http://www.voipphoneplanet.com/news/new-firmware-for-the-dir-601

Hope this works for you as well!

-Mark
Logged

ramuc

  • Level 1 Member
  • *
  • Posts: 2
Re: VOIP does not work with DIR-601
« Reply #2 on: August 03, 2010, 11:07:35 AM »
Thanks Mark. That worked! Really appreciate the help.

I upgraded to the firmware mentioned (1.01NA) and VOIP started to work.

I had sent an email to D-Link support, but the response I got was just not helpful. And the first thing I did when I had the problem with VOIP was to check for firmware updates from the Router's admin interface Tools-->Firmware --> CheckNow and it came back saying there were no new updates.

Logged