D-Link Forums
D-Link Wireless Routers for Home and Small Business => DIR-882 => Topic started by: holden321 on April 24, 2021, 05:21:35 AM
-
Is it possitble to limit speed for a client by IP, or MAC or some other way?
It seems there is no such options.
-
You can try setting QOS and set the device into a low priority section of QoS is about it.
-
Thanks for reply, but there is no QOS setting in admin interface.
-
I can see the QoS engine feature in user's manual (old interface?) but not in my interface.
http://joxi.net/Dr86oRdFo0vEB2
http://joxi.net/52akJg5SE5enKr
It is not suppors any more?
-
You don't see this under Features?
(https://i.postimg.cc/KvzmqQg0/QoSv130.png) (https://postimg.cc/bd7Xdxgn)
Your 2nd Link is broke...
-
This is my interface:
(http://dl4.joxi.net/drive/2021/04/26/0011/0967/779207/07/cc49979b47.jpg)
-
Your link is broke...
-
The Russian interface is different than the North American. Not sure if or where QoS settings are unfortunately. You may want to contact tech support.
-
Ohhhhhh.