New - COVR-2202 Firmware v1.03 Build10 Released

COVR - D-Link Whole Home Systems > COVR-2202

(1/2) > >>

FurryNutz:
Firmware: v1.03B10 06/28/2019 NA Region Only
Revision Info
Problems Resolved:
1. Fix VLAN issue (ISP Profile can’t be selected in Web UI)

Enhancements:
1. Support Tri-band for COVR COVR-2200 single pack (Bundle Name= COVR COVR-2200)
2. Support COVR Reunion
3. Support CAP Bridge Mode

Known Issues:
1. There is IOT issue when COVRCOVR-2200 connect with Intel AC8265AC8265. This issue will be fixed in v1.04.

Get it here: NA Region
COVR-2200

Please follow the> FW Update Process to ensure a good FW upgrade is performed.

Let us know how it works for you...

FurryNutz:
Updated my system today.

I first attempted to update the B Point first. First two attempts after logging into the B Points UI from the A point would not take the update. Kept saying the FW update failed. Upon a 3rd try the file was finally sent and the B Point accepted it and began to process it. The A point took the update file on first attempt with out issue. Using Opera browser.

I think Guest Network is working as expected now. It's enabled when it's enabled and disabled when it's disabled.

I see a Wireless + menu option for Schedule under wireless. Seems a user needs to ADD a schedule here and then configure anything here. Using the Time/Schedule is no longer seen here if configured there. Wireless schedule seems to be working now if nothing is selected in the schedule. However the WiFi radio is still being broadcast, and the SSID is hidden when using this. Makes sense since the B point needs a signal from the A point. ::)

AP Mode is now seeing under Operation. :o I'll give this a try. We probably need to know if the B point can be used in AP mode and weather the B point can be LAN connected as well? Or only the A Point needs to LAN connected while B point is wireless connected?

We would like to know what the following means for users and this system:
1. Support Tri-band for COVR COVR-2200 single pack (Bundle Name= COVR COVR-2200)
2. Support COVR Reunion
3. Support CAP Bridge Mode

aoeking@gmail.com:
I have updated with the latest update and now I cannot login to the router as it does not load the captcha. When I check the response from the router, I found that the router sends 404 for the captcha image.

<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.12.2</center>
</body>
</html>

I have restarted the router, still no luck.

Any advice before replacing the item?

Thanks

FurryNutz:
Link>Welcome!

* What region are you located?
* Are you wired or wireless connected to the router?
* Has a Factory Reset been performed?

What browser are you using? I didn't see this when I loaded FW while using Opera browser.

--- Quote from: aoeking@gmail.com on July 18, 2019, 12:50:32 AM ---I have updated with the latest update and now I cannot login to the router as it does not load the captcha. When I check the response from the router, I found that the router sends 404 for the captcha image.

<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.12.2</center>
</body>
</html>

I have restarted the router, still no luck.

Any advice before replacing the item?

Thanks

--- End quote ---

FurryNutz:
Any Status on this?

--- Quote from: aoeking@gmail.com on July 18, 2019, 12:50:32 AM ---I have updated with the latest update and now I cannot login to the router as it does not load the captcha. When I check the response from the router, I found that the router sends 404 for the captcha image.

<html>
<head><title>404 Not Found</title></head>
<body bgcolor="white">
<center><h1>404 Not Found</h1></center>
<hr><center>nginx/1.12.2</center>
</body>
</html>

I have restarted the router, still no luck.

Any advice before replacing the item?

Thanks

--- End quote ---

Navigation

[0] Message Index

[#] Next page

Go to full version