D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-826L => Topic started by: sirblade on December 31, 2015, 01:47:33 PM

Title: 826L and bonjour
Post by: sirblade on December 31, 2015, 01:47:33 PM
I saw other posters are using endpoint independent setting in firewall in other models of DLINK to get bonjour protocol to work but it is not an option in 826L firmware 1.05, is there an earlier firmware for 826L that has it?
Title: Re: 826L and bonjour
Post by: FurryNutz on December 31, 2015, 01:50:02 PM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)



Internet Service Provider and Modem Configurations

How are you trying to use Bonjour? Is it not working for you? Please give more details of the problem with Bonjour and devices your trying to use with it.
Title: Re: 826L and bonjour
Post by: sirblade on December 31, 2015, 02:14:24 PM
Quote from: FurryNutz on December 31, 2015, 01:50:02 PM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
  • What region are you located?


Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

How are you trying to use Bonjour? Is it not working for you? Please give more details of the problem with Bonjour and devices your trying to use with it.

hi, I have Hardware Version: A1     Firmware Version: 1.05   
located US midwest (watch out for floods)
using cable modem cisco dpc3008 docsis 3
trying to use bonjour chat feature but it drops after a few min

thanks
Title: Re: 826L and bonjour
Post by: FurryNutz on December 31, 2015, 02:22:50 PM
What PC plat form and OS are you using?

Does the PC have a reserved IP address?
Title: Re: 826L and bonjour
Post by: FurryNutz on March 10, 2016, 07:00:44 AM
Any status on this?  ???

Quote from: sirblade on December 31, 2015, 01:47:33 PM
I saw other posters are using endpoint independent setting in firewall in other models of DLINK to get bonjour protocol to work but it is not an option in 826L firmware 1.05, is there an earlier firmware for 826L that has it?