• April 17, 2024, 07:11:00 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: B Hardware Firmware Update  (Read 22083 times)

davevt31

  • Level 9 Member
  • ****
  • Posts: 1589
B Hardware Firmware Update
« on: February 03, 2011, 11:41:16 PM »
There is a firmware update on the DLink website for the B Hardware:

Firmware 2.01NA 2/03/2011
¤ Added ALG.
¤ Supports IPv6 Spec 1.12R.

ftp://ftp.dlink.com/Gateway/dir655_revB/Firmware/dir655_revB_FW_201NA.zip
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: B Hardware Firmware Update
« Reply #1 on: February 04, 2011, 08:41:19 AM »
Hi davevt31,

Thanks!
Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

schmieg

  • Level 2 Member
  • **
  • Posts: 41
Re: B Hardware Firmware Update
« Reply #2 on: February 04, 2011, 09:11:04 PM »
I donwloaded and installed the 2.01NA firmware this afternoon and the router seems much faster than with the 2.00NA. The VPN my wife uses to work from home also seemed faster and more stable. I think I'm going to like this; although, I wasn't having a lot of the problems others have mentioned here. One thing I did notice is that the Daylight Savings button seems to work with the scheduling option now. Before, it didn't matter what the start and end dates were set for. It just advanced the time by one hour no matter what.
Logged

Ecsa0014

  • Level 1 Member
  • *
  • Posts: 14
Re: B Hardware Firmware Update
« Reply #3 on: February 06, 2011, 09:52:58 PM »
Thanks for the info. Hopefully this will allow the 655 to play a little more nicely with my Nettalk Duo.
Logged

muyanga

  • Level 1 Member
  • *
  • Posts: 1
Re: B Hardware Firmware Update
« Reply #4 on: February 23, 2011, 07:28:09 PM »
I just upgraded my firmware from 2.00NA to this latest one 2.01NA. I don't know if anyone has experienced this problem. After the firmware upgrade, when I login using moxila firefox or any internet explorer, I alway see this error (problem loading page: The connection to the server was reset while the page was loading.)

    * The site could be temporarily unavailable or too busy. Try again in a few
          moments.

    *   If you are unable to load any pages, check your computer's network
          connection.

    *   If your computer or network is protected by a firewall or proxy, make sure
          that Firefox is permitted to access the Web.

Please try again.

I kept trying several time and it will and sometime it will take me back to the status page or login page again.
Please if anyone has experienced this same issue or know how to resolve it, please let me know. My router is DLINK-655 version B. and my ISP is Times warner. Thanks.


       
       
     


     
     
Logged

davevt31

  • Level 9 Member
  • ****
  • Posts: 1589
Re: B Hardware Firmware Update
« Reply #5 on: February 23, 2011, 09:07:26 PM »
Do a reset to Factory Defaults on the Router and reflash.  Then do your settings by hand, don't reuse the config file.
Logged

Jalapano

  • Level 1 Member
  • *
  • Posts: 8
Re: B Hardware Firmware Update
« Reply #6 on: February 24, 2011, 05:38:55 PM »
I have the  Dir655    Hardware Version: B1      Firmware Version: 2.00    

i want to use Firmware: 2.01NA  ( need the alg settings)

But when i try to upgrade it says :

"The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this Gateway, or the uploaded file may be corrupted.

If the uploaded file is correct, it is possible that the gateway may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a "user" instead of an "admin" - only administrators can upload new firmware.

The Gateway will not be reprogrammed. "



Tried resetting the router, i am logged in as admin and i'm on a wired connection to the router.

So what can i try now?

Hope someone can help me out here :)
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: B Hardware Firmware Update
« Reply #7 on: February 24, 2011, 05:55:07 PM »
Quote from: Jalapano on February 24, 2011, 05:38:55 PM
I have the  Dir655    Hardware Version: B1      Firmware Version: 2.00    

i want to use Firmware: 2.01NA  ( need the alg settings)

But when i try to upgrade it says :

"The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this Gateway, or the uploaded file may be corrupted.

If the uploaded file is correct, it is possible that the gateway may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a "user" instead of an "admin" - only administrators can upload new firmware.

The Gateway will not be reprogrammed. "



Tried resetting the router, i am logged in as admin and i'm on a wired connection to the router.

So what can i try now?

Hope someone can help me out here :)

Hi Jalapano,

See this post:
http://forums.dlink.com/index.php?topic=36970.0
Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

Jalapano

  • Level 1 Member
  • *
  • Posts: 8
Re: B Hardware Firmware Update
« Reply #8 on: February 24, 2011, 07:02:06 PM »
Yes i tried to "Restore to Factory Defaults."

But when i try to load the new firmware i still get this one.

The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this Gateway, or the uploaded file may be corrupted.

If the uploaded file is correct, it is possible that the gateway may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a "user" instead of an "admin" - only administrators can upload new firmware.

The Gateway will not be reprogrammed. "



Any other things i can try?
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: B Hardware Firmware Update
« Reply #9 on: February 24, 2011, 07:54:10 PM »
Quote from: Jalapano on February 24, 2011, 07:02:06 PM
Yes i tried to "Restore to Factory Defaults."

But when i try to load the new firmware i still get this one.

The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this Gateway, or the uploaded file may be corrupted.

If the uploaded file is correct, it is possible that the gateway may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a "user" instead of an "admin" - only administrators can upload new firmware.

The Gateway will not be reprogrammed. "



Any other things i can try?

Hi Jalapano,

On the downloaded firmware for the Unit, right-click and click rename. Do a Ctrl -c for copy. Post the exact information in a reply here.

Also, after you are logged into the Gateway Settings, post exactly what it saids on the very top line.

Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

davevt31

  • Level 9 Member
  • ****
  • Posts: 1589
Re: B Hardware Firmware Update
« Reply #10 on: February 24, 2011, 11:11:35 PM »
Did you extract the .bin file from the zipped file?
Logged

Jalapano

  • Level 1 Member
  • *
  • Posts: 8
Re: B Hardware Firmware Update
« Reply #11 on: February 25, 2011, 12:53:30 AM »
DIR655B1_FW201NAB14.bin

General
Time :      25. februar 2011 09:52:56
Firmware Version :      2.00 , 12, Aug, 2010


Firmware Version: ver2.00b07
Firmware Date: 12, Aug, 2010
KERNEL: 2.6.28, SDK: 1.0, Build: 0033, Date: Wed, 12, Aug, 2010
Wireless Domain(2.4GHz): 0x30
SSID: dlink
WLAN Channel List: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
WLAN MAC: 5C:D9:98:5D:7D:00
LAN MAC: 5C:D9:98:5D:7D:00
WAN MAC: 5C:D9:98:5D:7D:01
HW Ver: B1
Firmware Notify: http://wrpd.dlink.com.tw/router/firmware/query.asp?model=DIR-655_Bx_Default
Firmware Global URL: http://www.dlink.com
CheckSum: 0x3397935F
Language: DISABLE
SVN Revision: 4105
« Last Edit: February 25, 2011, 01:41:15 AM by Jalapano »
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: B Hardware Firmware Update
« Reply #12 on: February 25, 2011, 09:57:46 AM »
Quote from: Jalapano on February 25, 2011, 12:53:30 AM
DIR655B1_FW201NAB14.bin

General
Time :      25. februar 2011 09:52:56
Firmware Version :      2.00 , 12, Aug, 2010


Firmware Version: ver2.00b07
Firmware Date: 12, Aug, 2010
KERNEL: 2.6.28, SDK: 1.0, Build: 0033, Date: Wed, 12, Aug, 2010
Wireless Domain(2.4GHz): 0x30
SSID: dlink
WLAN Channel List: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
WLAN MAC: 5C:D9:98:5D:7D:00
LAN MAC: 5C:D9:98:5D:7D:00
WAN MAC: 5C:D9:98:5D:7D:01
HW Ver: B1
Firmware Notify: http://wrpd.dlink.com.tw/router/firmware/query.asp?model=DIR-655_Bx_Default
Firmware Global URL: http://www.dlink.com
CheckSum: 0x3397935F
Language: DISABLE
SVN Revision: 4105

Hi Jalapano,

My second information is missing from your post.

Where is the information from the very first line at the very top of the Gateway Settings Page?

Better yet, do a PrtScrn Snapshot and post a Jpeg Image, of the very top of your Gateway Settings Page, if you don't know what I am referring to.

Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

Jalapano

  • Level 1 Member
  • *
  • Posts: 8
Re: B Hardware Firmware Update
« Reply #13 on: February 26, 2011, 05:03:26 AM »
Hmm  i feel stupid now, but i cant find it :\
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: B Hardware Firmware Update
« Reply #14 on: February 26, 2011, 07:19:43 AM »
Quote from: Jalapano on February 26, 2011, 05:03:26 AM
Hmm  i feel stupid now, but i cant find it :\

Hi Jalapano,

Click on this link:http://192.168.0.1/

What does it read / say at the very top in small White Letters?
Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10
Pages: [1] 2
« previous next »