D-Link Forums

D-Link IP Cameras for Home => DCS series Network Cameras => Topic started by: alanazar on January 24, 2017, 01:06:16 AM

Title: Options for External RTSP & HTTP settings on some camera models not available
Post by: alanazar on January 24, 2017, 01:06:16 AM

Hello,

I have the following cameras:
2x DCS-2630L
2x DCS-2332L
2x DCS-5222LB1

The DCS-2630L software under Setup \ Network settings \ UPnP & UPnP port forward to define the external ports for HTTP\HTTPS\RTSP.

The other cameras only have the UPnP port forward option to 1 port which I'm assuming is the HTTP. The problem with this is it impossible to manage internal and external ports which I need to use.

So the question is: will these same options that exist on the 2630L be updated in the next firmware updates of the other models?

Thanks

Title: Re: Options for External RTSP & HTTP settings on some camera models not available
Post by: rtchiu on February 10, 2017, 07:24:29 AM

does DCS-5009L have rtsp url? i tried looking it up at the internet, especially at www.ispyconnect.com which has the most list of url for cameras it seems this model does not have rtsp support...

Title: Re: Options for External RTSP & HTTP settings on some camera models not available
Post by: alanazar on March 04, 2017, 07:33:43 AM

Quote from: rtchiu on February 10, 2017, 07:24:29 AM

does DCS-5009L have rtsp url? i tried looking it up at the internet, especially at www.ispyconnect.com which has the most list of url for cameras it seems this model does not have rtsp support...

Not sure about your model but i looked online and it doesn't seem so. You should still be able to connect through http though.

Title: Re: Options for External RTSP & HTTP settings on some camera models not available
Post by: RYAT3 on March 04, 2017, 09:59:47 AM

Quote from: rtchiu on February 10, 2017, 07:24:29 AM

does DCS-5009L have rtsp url? i tried looking it up at the internet, especially at www.ispyconnect.com which has the most list of url for cameras it seems this model does not have rtsp support...

I don't see anything in the manual. It is a lower end model camera.

ftp://ftp2.dlink.com/PRODUCTS/DCS-5009L/REVA/DCS-5009L_REVA_MANUAL_1.00_EN_US.PDF
 (http://ftp://ftp2.dlink.com/PRODUCTS/DCS-5009L/REVA/DCS-5009L_REVA_MANUAL_1.00_EN_US.PDF)

Title: Re: Options for External RTSP & HTTP settings on some camera models not available
Post by: FurryNutz on March 05, 2017, 12:16:00 PM

Some model cameras don't support the advanced uPnP configuration. Mostly automatic.
If you need to do any port configurations, you might disable uPnP and set up port forward configurations ON the main host router and disable uPnP there as well.