• March 29, 2024, 04:43:30 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DGS-1100-08 Link Aggregation Zero TX traffic  (Read 4309 times)

fabrizziop

  • Level 1 Member
  • *
  • Posts: 1
DGS-1100-08 Link Aggregation Zero TX traffic
« on: March 17, 2021, 07:00:50 AM »

Hello,

I've got DGS-1100-08 Rev B1 running software ver. 1.00.B037 (provided by support team to try and fix this issue).

I have ETH1/ETH2 set up for link aggregation channel #1 and ETH5/ETH6 for channel #2. The DGS switch is getting RX traffic on both ports on each aggregation group as there are several MACs / IPs on both groups / both ends.  However the switch is only sending traffic over ETH1 / ETH5, no traffic is sent on ETH2 / ETH6 unless the other port is down, so this is actually working as primary/ backup and not load balancing at all on the DGS switch.

I have a case raised with DLINK support on this. Has anyone faced this issue and found a solution for it?.

Thanks.

Code: [Select]
Port TxOK TxErr RxOK RxErr
eth1 397675 0 250634 0
eth2 0 0 521648 0 <------
eth3 0 0 0 0
eth4 97820 0 99393 0
eth5 4980739 0 181644 0
eth6 0 0 7010560 0 <------
eth7 87 0 23839 0
eth8 6728433 0 4115992 0
Logged