Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ivan]

Josu, please see PM I sent.

[loy1068]

I too get a prompt of firmware upgrade when accessing mydlink.com website to view my NAS. Seeing this post, i do not want to upgrade just yet. Have anybody tried it? Will it break the 3rd party addon such as owncloud and etc? Thanks

[Manul]

ftp://ftp.dlink.eu only gets me a request for user and password and looking up ftp.dlink.eu on the EU registry database only gets an illegal tag for the ftp.

dlink.eu actually seems to be registered to D-Link (https://whois.eurid.eu/en/?domain=dlink.eu). As for the username/password prompt: The site seems to allow anonymous access using the username 'anonymous' and a valid email-address as password - this is (or used to be) quite common practice for anonymous ftp sites (see e.g. http://www.webopedia.com/TERM/A/anonymous_FTP.html). Looks legit to me...

[Blasse]

This firmware is also available on polish mydlink site (https://pl.mydlink.com/download#) and has described problem with ssh access.

[lsimma]

Hello

yesterday after search with google i downloaded and flashed V1.07 to my DNS-320LW with HW Version A2.
Update was successfully but today i was not able run the backup on external  1TB USB disk (USB disk hast ext4 format).
Today i downgraded to  1.06b03 and backup is now running.

From this forum entry i see that Version 1.07b04 is for Hardware Revision A3 !! and NOT for Hardware Revision A2 (which i have)
http://www.dlink-forum.info/showthread.php?tid=2559&page=14

Files downloaded from
ftp://ftp.dlink.eu/Products/dns/dns-320l/driver_software/
ftp://ftp.dlink.eu/Products/dns/dns-320lw/driver_software/

Today i realized that the filename contains the Hardware Revision in it _revA3_ , i think this is the reason why is was only partially successful on my Rev. A2 ShareCenter .
ftp://ftp.dlink.eu/Products/dns/dns-320l/driver_software/DNS-320L_fw_revA3_1-07b04_all_multi_20151019.zip

Please check on the botton of your ShareCenter that you have a Hardware Rev. 3 and no older Hardware Revision.

Lukas

[FurryNutz]

Most of the time Revs in the same class are compatible so Rev A3 FW should work with A1 and any A2 if they were built.

I highly recommend that you phone contact your regional D-Link support office ON the phone and ask them specifically about what is and is not supported.

[lsimma]

Hello

you a right i will try to call D-link support on phone tomorrow.

I forgot to write that i see the 1.07 Firmware in the DNS-320L/LW Firmware Release Notes:
http://d2okd4tdjucp2n.cloudfront.net/DNS-320L/DNS-320L(LW)_Release_Note_for_Firmware_v1.07.pdf
Found in https://eu.mydlink.com/download#  -> Storage -> DNS-320L -> Firmware -> v1.07  -> Firmware Release Note

Lukas
 

[FurryNutz]

Let us know how it goes.

[masterxilef]

It's also available for me in the latin american mydlink website, a little bit odd because normally the latest release doesn't appear right away on the latam site.
The release notes are the same.
Also, if I connect to my mydlink account it's asking me for the update and redirects me to de 1.07 firmware download.

[FurryNutz]

You might phone contact your regional D-link support office and ask them about this version and SSH access.

It's also available for me in the latin american mydlink website, a little bit odd because normally the latest release doesn't appear right away on the latam site.
The release notes are the same.
Also, if I connect to my mydlink account it's asking me for the update and redirects me to de 1.07 firmware download.

[masterxilef]

Thanks, wasn't asking for anything, just stating a fact.

Anyways, I just installed 1.07 firmware, I gotta say, I really like the new info panel.
Everything seems to run fine on a rev A1 I believe.
But I'm just using it as file nas, not using any addons or features, and haven't tried ssh.

[FurryNutz]

Let us know if SSH works for you.

Thanks, wasn't asking for anything, just stating a fact.

Anyways, I just installed 1.07 firmware, I gotta say, I really like the new info panel.
Everything seems to run fine on a rev A1 I believe.
But I'm just using it as file nas, not using any addons or features, and haven't tried ssh.

[masterxilef]

Just tried SSH, not working for me also.
When I first tried, I would get wrong password errors, after a couple tries, and changing the password now I get the access denied error.

[FurryNutz]

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

Just tried SSH, not working for me also.
When I first tried, I would get wrong password errors, after a couple tries, and changing the password now I get the access denied error.

[twtn]

Hi

I did suffer from the same issue regarding no working ssh access after upgrading to FW 1.07. After that I downgraded to FW 1.04, since i would like to have ssh access and eventually installed the Fun Plug.

After messing around I decided to upgrade to FW 1.07 once again and after the upgrade I decided to do a "Restore To Factory Default Settings" and see if it would work, and it did.
Here is how I did it:

1. Disabled Fun Plug by removing the ffp startup file.
2. Updated to 1.07.
3. Did a restore to factory default settings.
4. Changed all my settings, so it was setup like before the upgrade and enabled ssh.
5. Did a reboot.
6. Did a power off, by pressing power on/off for 5 sec.
7. Did a power on, by pressing power on.

And now I can connect through telnet or ssh. But I think there are some limitations. may the telnet and ssh server needs some change in the settings?
* When connecting through telnet I get the busybox.
* When connected with winscp, ssh client, i can't move around with files which I could with FW 1.04 and fun_plug.


Regards,
Thomas