Topic: DCS-2330L is triggered all the time in spite of settings. (Read 7448 times)

tbnz · « **on:** February 27, 2020, 06:45:53 PM »

MY camera has taken to recoding 20secs of video every 20secs, whatever settings I have. I can have motion detection checked/not checked, PIR ditto. It makes no difference. MY SD card is just getting filled with hundreds of 20-sec clips.

I suspect I'm missing something obvious, but I don't know what.

Any ideas?

RYAT3 · « **Reply #1 on:** February 27, 2020, 07:26:04 PM »

Hard to say with out specifics.

Is sensitivity too high?

PIR behind a window is a big problem.

Is their shadows?
DO you have to whole image painted red?

tbnz · « **Reply #2 on:** February 27, 2020, 11:29:50 PM »

The thing is is that it seems to be doing it even if I have motion and PIR both turned off in motion detection setup.

FurryNutz · « **Reply #3 on:** February 28, 2020, 06:09:09 AM »

Have you factory reset the camera then setup from scratch?

What FW version is currently loaded on the camera?

tbnz · « **Reply #4 on:** February 28, 2020, 04:54:35 PM »

A factory reset seems to have fixed it, although I'll wait a few hours before celebrating.

It would be nice to know why it went haywire though.

Thanks for the advice.

FurryNutz · « **Reply #5 on:** February 29, 2020, 01:05:04 PM »

Glad it's working again.

Enjoy.

D-Link Forums

News:

Author Topic: DCS-2330L is triggered all the time in spite of settings. (Read 7448 times)

tbnz

DCS-2330L is triggered all the time in spite of settings.

RYAT3

Re: DCS-2330L is triggered all the time in spite of settings.

tbnz

Re: DCS-2330L is triggered all the time in spite of settings.

FurryNutz

Re: DCS-2330L is triggered all the time in spite of settings.

tbnz

Re: DCS-2330L is triggered all the time in spite of settings.

FurryNutz

Re: DCS-2330L is triggered all the time in spite of settings. (RESOLVED)