• October 11, 2024, 02:15:27 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Finding Faster DNS Addresses using Name Bench  (Read 54505 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Finding Faster DNS Addresses using Name Bench
« on: March 27, 2013, 02:52:30 PM »

DNS: Why It’s Important & How It Works

There are a couple of tools that users can use to find better or faster working DNS IP Addresses to use instead of automatic default ISP addresses that are handed out by the ISP.

1. Download one of the following to your Mac or PC:
Gibson Research Domain Name Speed Benchmark
Googles Open-source DNS Benchmark Utility

2. Install the program on to the Mac or PC.

3. Directly connect one wired LAN pc to the ISP modem. Disconnect any external routers from the ISP Modem. Only test with PC and ISP modem directly connected. (This eliminates any un-necessary router processing while testing and generating false results.)

4. Run the program. Should take about 5 minutes or less.

5. The program should find other, better or faster working DNS IP addresses. Write these addresses down.

6. Disconnect the PC from the ISP modem and re-connect the router to the ISP modem and re-connect the PC to the router.

7. Log into the routers web page and under Setup/Internet/Manual settings, input the 2 best DNS IP addresses into the Primary and Secondary field boxes. Save Settings. Reboot Later if this option is available.

8. Under Setup/Networking, disable DNS Relay. This option can be left enabled if connections fail or web sites fail to connect correctly. Preferred mode is disabled. Save Settings.

9. Reboot the router and ALL connected client devices or flush and clear ALL client device DNS cache.

10. After the router reboots, test Internet speeds and Internet web site connections for functionality. Should be good to go.

NOTE: Be aware that these DNS IP addresses could be changed with out notice, so it all of a sudden you are not getting web site connections. Revert back to your ISP DNS IP addresses and test again. If it works again with ISP DNS, then re-run the Name Bench program to re-acquire new DNS IP addresses.

It's recommended to use default ISP DNS addresses that your ISP automatically sends to modems and routers. Especially for troubleshooting. If your not an advanced user, then keep with the default ISP DNS IP addresses.

Other Security DNS Service Sites:
Norton ConnectSafe
 
https://www.opendns.com/welcome/
To properly test whether or not your OpenDNS settings are working on your router use the link and if a big check mark appears then the OpenDNS settings are good.

Other sources:
http://beebom.com/2015/06/best-dns-servers

FYI:
DNS Name Resolution and D-Link Routers FAQ

Enjoy.
« Last Edit: September 19, 2015, 10:36:36 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.