D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: cac3a on February 07, 2016, 01:52:15 PM

Title: Simple routing not so simple
Post by: cac3a on February 07, 2016, 01:52:15 PM
I'm trying to setup simple static routing on lan.
My lannet is 10.0.2.0/24 and GW is 10.0.2.1
I have another device connected on lannet with local ip of 10.0.2.6 and i want to route traffic with ip's 192.168.207.154 to 10.0.2.6.

I've setup a static route and when using router icmp tool I get all success response. When i look at the logs I see:

Date   Severity   Category/ID   Rule   Proto   Src/DstIf   Src/DstIP   Src/DstPort   Event/Action
2016-02-08 14:46:09   Warning   RULE 6000051   Default_Rule   ICMP   lan   10.0.2.37 192.168.207.154      ruleset_drop_packet drop
ipdatalen=40 icmptype=ECHO_REQUEST echoid=1 echoseq=120

Where is the option that is blocking the icmp ?

Also, I've setup a rule that would allow the connection on all ports for that network, but when I send request over port 8080 this is what I get in the logs:

Date   Severity   Category/ID   Rule   Proto   Src/DstIf   Src/DstIP   Src/DstPort   Event/Action
2016-02-08 14:47:52   Debug   CONN 600001   ping_fw_custom   TCP   lan lan   10.0.2.37 192.168.207.154   53800 8080   conn_open

however I don't get anything back. Its like the traffic is going only one way...?

Anyone has any ideas?

Thanks.
Title: Re: Simple routing not so simple
Post by: FurryNutz on February 08, 2016, 07:00:50 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

What D-link product model do you refer too?
Title: Re: Simple routing not so simple
Post by: cac3a on February 08, 2016, 10:15:26 AM
DFL-260E with the latest firmware.

I'm in NJ.
Title: Re: Simple routing not so simple
Post by: FurryNutz on February 16, 2016, 09:09:01 AM
Any status on this?  ???