D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => COVR-3902-US => Topic started by: GreenBay42 on January 23, 2018, 08:07:09 AM

Title: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: GreenBay42 on January 23, 2018, 08:07:09 AM
This BETA firmware fixes issues with the 2.4GHz band being locked on channel 5. Only install on the router.

Download here - ftp://FTP2.DLINK.COM/PRODUCTS/COVR-3902-US/BETA/COVR-2600R_REVA_FIRMWARE_ROUTER_v1.01b05_beta01_hcr2.zip (ftp://FTP2.DLINK.COM/PRODUCTS/COVR-3902-US/BETA/COVR-2600R_REVA_FIRMWARE_ROUTER_v1.01b05_beta01_hcr2.zip)

Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: FurryNutz on January 23, 2018, 09:42:01 AM
Yay.

Thank you.  ;)
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: FurryNutz on February 19, 2018, 11:50:13 AM
Think is this version is pretty solid. I've taken this to my friends house which needed a wireless upgrade. There current router doesn't seem powerful enough to get thru a 50's built house. Solid brick and old style built. I set this up for them and definite improvement. Just short term until they get some LAN cable runs going. Working well though. They stream Netflix and DirectTV.
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: davevt31 on July 11, 2018, 03:49:53 PM
Any word on an Official release?  It has been 6 months.
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: GreenBay42 on July 12, 2018, 07:06:57 AM
I will email the project manager and see what the status is.
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: FurryNutz on November 07, 2018, 10:58:41 AM
Any updates on this?  :o

I will email the project manager and see what the status is.
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: GreenBay42 on November 07, 2018, 11:42:11 AM
Nope
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: davevt31 on April 16, 2019, 02:15:34 PM
Hey Greenbay,

Any idea what this is?

ftp://ftp2.dlink.com/SECURITY_ADVISEMENTS/COVR-3902/REVA/COVR-3902_REVA_ROUTER_FIRMWARE_v1.01B05_BETA.zip

shows a date of2/13/2019 on the FTP site and says a two file update sequence that doesn't say which to do first. 

Lat time I did a two file update it bricked the extender.
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: GreenBay42 on April 16, 2019, 02:34:21 PM
This is a security fix for the router. The middle firmware file gets installed first. If it fails, then just upload the other file. The middle file adds an encryption layer to allow only encrypted firmware files to be installed.

https://supportannouncement.us.dlink.com/announcement/publication.aspx?name=SAP10109 (https://supportannouncement.us.dlink.com/announcement/publication.aspx?name=SAP10109)
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: davevt31 on April 16, 2019, 03:13:55 PM
I will give it a go.
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: GreenBay42 on April 16, 2019, 03:15:51 PM
fingers crossed  ;D
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: davevt31 on April 16, 2019, 03:25:09 PM
All good, both files loaded with no issues.

No need to call a Mason.
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: GreenBay42 on April 17, 2019, 09:26:37 AM
 ;)
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: kungfu1974 on April 25, 2019, 07:38:45 AM
can i use this beta firmware if i am staying in singapore??
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: FurryNutz on April 25, 2019, 07:53:45 AM
Most FW here is meant for the USA region.
Does the Singapore site have updated FW versions?
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: kungfu1974 on April 25, 2019, 05:52:44 PM
hmm, then i better not try. otherwise afraid got issues later. thanks FurryNutz boss
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: FurryNutz on April 26, 2019, 06:30:34 AM
 ;)
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: puttapoom on September 14, 2020, 10:49:47 PM
This is a security fix for the router. The middle firmware file gets installed first. If it fails, then just upload the other file. The middle file adds an encryption layer to allow only encrypted firmware files to be installed.

https://supportannouncement.us.dlink.com/announcement/publication.aspx?name=SAP10109 (https://supportannouncement.us.dlink.com/announcement/publication.aspx?name=SAP10109)

Hi
I'm flash firmware in link above it work almost fine but it can't downgrade
I want to flash  back so i go recovery mode do just like in description
went it done .power light are orange not blink. can't go to web interface
close it and when open it power light alway orange .
Help please!
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: FurryNutz on September 15, 2020, 07:12:06 AM
Try the recovery mode again and this time install v1.01 B05_HCR2 file. I would not recommend downgrading.
What browser are you using to send the FW file?

Hi
I'm flash firmware in link above it work almost fine but it can't downgrade
I want to flash  back so i go recovery mode do just like in description
went it done .power light are orange not blink. can't go to web interface
close it and when open it power light alway orange .
Help please!
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: puttapoom on September 15, 2020, 07:42:15 AM
not work
I try all firmware in ftp2.dlink it like browser upload file to router but router donesn't flash it blink amber 2 time then solid amber.
use IE11 ,IE8 ,FF80 ,FF11 in win7 win10  3pc disable antivirus firewall
is it because of encryption firmware?

Try the recovery mode again and this time install v1.01 B05_HCR2 file. I would not recommend downgrading.
What browser are you using to send the FW file?

Hi
I'm flash firmware in link above it work almost fine but it can't downgrade
I want to flash  back so i go recovery mode do just like in description
went it done .power light are orange not blink. can't go to web interface
close it and when open it power light alway orange .
Help please!
Title: Re: COVR-3902-US BETA Firmware v1.01B05_HCR2 Released
Post by: FurryNutz on September 15, 2020, 07:44:02 AM
Mostly likely. I recommend you get ahold of your regional D-Link support office to see what options you have available. The recovery mode should work to get any FW version loaded. However if the recovery didn't work the first time or was a bad recovery, possible the router is now bricked.