D-Link Forums

D-Link FAQ => Network Camera FAQs => Topic started by: JavaLawyer on February 07, 2015, 10:16:32 AM

Title: DCS Network Cameras - Use a Cloud Router to Register a Cloud Camera with mydlink
Post by: JavaLawyer on February 07, 2015, 10:16:32 AM
Using D-Link Zero Configuration, a D-Link Cloud-enabled router can be used to register a Cloud camera with mydlink. Cloud cameras registered using Zero Configuration do not require the Setup Wizard to complete mydlink registration. In fact, if a Cloud router is used for mydlink registration and the Cloud camera is manually configured via the camera web UI (using a PC Internet browser), the Setup Wizard is not required for Cloud camera setup.


What is Zero Configuration?

Zero Configuration makes it easy to set up your D-Link Cloud Camera. Simply connect it to a mydlink-enabled Cloud Router - that′s it! Your camera will automatically appear in your mydlink account the next time you sign in.

Procedure




(https://www.mydlink.com/css/whats_zero_config/images/feature_2.jpg)
Set up a multi-camera network in minutes! Instead of setting up each camera
individually, just connect all your Cloud Cameras to your mydlink-enabled Cloud
Router to automatically configure them. No networking knowledge is required;
mydlink does the work for you.

(https://www.mydlink.com/css/whats_zero_config/images/scenario_1.jpg)     (https://www.mydlink.com/css/whats_zero_config/images/scenario_2.jpg)     (https://www.mydlink.com/css/whats_zero_config/images/scenario_3.jpg)
Connect the Cloud Camera to your mydlink-
enabled Cloud Router with an Ethernet cable, or
with WPS instead.
     Go to the mydlink website, click on the new device
notification, and add the camera to your account.
     Your camera is now configured, and you can
view it from your PC or mobile device!



Notes
Additional Resources