D-Link Forums
D-Link IP Cameras for Home => DCS series Network Cameras => Topic started by: morenomdz on February 16, 2012, 06:23:51 AM
-
Hello there, I've been trying to set up this camera to work but it is been kinda painfull.
I did install it as usual, updated its firmware, it works perfecly on the intranet. I did set its ip to be fixed at 192.168.1.9 and I can always connect it without any issue.
But, when trying to conect to it remotely, it only works here and there... I did set up a dlinkddns to it at first, I tought it was the problem so i purchased a dyndns service to see if it was the dns the problem, but same thing, sometimes I can get to connect to the camera, most of the time I cant. It simple times out.
I did route the ports 80 and 554, I even added more ports 5001 to 5004 as other models of cameras use these, but no go. Can't get the camera to work propely over the internet.
What am I doing wrong? My modem / router is a thompson TG580.
-
Just for the sake of testing, right now the camera is working, the link to it is madchipz.dyndns.tv
-
Camera Name Home
Time & Date Jan 3 09:06:33 2010
Firmware Version 1.05, 4630
MAC Address 1C:AF:F7:77:49:0E
IP Address 192.168.1.9
IP Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS 192.168.1.1
Secondary DNS 192.168.1.1
PPPoE Disable
DDNS OK
Right now, it is not working... WTH is wrong with this camera?
By the way the camera has the fw 1.05 installed.
-
No go, tried everything I could, I got one pc on the same network to be controlled remotely with the same dns without problems, but the camera simple do not work over the internet. It works few times only.