The Graveyard - Products No Longer Supported > DIR-880L

DIR-880L FW v1.20 Build 01 - Official FW Release - WW Region!

(1/3) > >>

FurryNutz:
Firmware:   v1.20 Build 01   03/28/2018   WW Region!
Revision Info:   
Problems Resolved:
1. Fix SharePort Plus utility and DLNA access
2. Update WPA2 security patch (KRACK) fix

NOTE: This version is from the EU region, however can be applied to NA region routers. if your DIR-880L router is working with out any issues, it's recommended to keep the current version of FW that is loaded unless your are effected by one of the fixes. Use at your own risk. NA region will post official FW as well.

Get it here:
EU Region:
DIR-880L
This is a two step FW update process. Please follow the included update process instructions in the zip file. There is two FW files that has to be used to complete the update fully.

Follow the >FW Update Process

Let us know how it works for you...

hvgsel:
Hi there,

I have this firmware installed and it works flawlessly.
The Krack fix i cannot check, but DLNA intermittent problems, which i had, seem to be fixed now.
I do not know if it was there in an earlier update, but you can now add an IP-reservation from the connected clients list. Before (at least untill V1.08B04) you had to wait until a device showed up there and then you could change it's credentials.

The fix consists of 2 seperate firmware updates, which have to be done after eachother, so read the readme first and....reset first.
You cannot return to earlier firmware after this update.

Good luck with it, Hugo

FurryNutz:
Enjoy.  ;)


--- Quote from: hvgsel on May 07, 2018, 04:02:31 AM ---Hi there,

I have this firmware installed and it works flawlessly.
The Krack fix i cannot check, but DLNA intermittent problems, which i had, seem to be fixed now.
I do not know if it was there in an earlier update, but you can now add an IP-reservation from the connected clients list. Before (at least untill V1.08B04) you had to wait until a device showed up there and then you could change it's credentials.

The fix consists of 2 seperate firmware updates, which have to be done after eachother, so read the readme first and....reset first.
You cannot return to earlier firmware after this update.

Good luck with it, Hugo

--- End quote ---

Nawaab:
Hello,

I tried upgrading my DIR-880L from 1.08wwB06 to this firmware per the instructions, however, I receive an error when trying upload the first firmware file (1.10). I tried uploading the file via Chrome, Edge and Internet Explorer browsers, but none worked. I then tried uploading the second firmware file (1.20) and had no problem.

Is there any risk with not being able to install the first firmware file?

H/W: A2
Upgrading from firmware 1.08wwB06
Location: Toronto, Ontario , CANADA
ISP: Rogers Interent

FurryNutz:
Skip the intermediate file, v1.10 and apply the v1.20 file...


--- Quote from: Nawaab on May 07, 2018, 11:20:10 AM ---Hello,

I tried upgrading my DIR-880L from 1.08wwB06 to this firmware per the instructions, however, I receive an error when trying upload the first firmware file (1.10). I tried uploading the file via Chrome, Edge and Internet Explorer browsers, but none worked. I then tried uploading the second firmware file (1.20) and had no problem.

Is there any risk with not being able to install the first firmware file?

H/W: A2
Upgrading from firmware 1.08wwB06
Location: Toronto, Ontario , CANADA
ISP: Rogers Interent

--- End quote ---

Navigation

[0] Message Index

[#] Next page